SECTION
SECTION 6—SEAT
WARNING
After any adjustments, repair or service and before use, make sure all attachment hardware is tightened securely - otherwise, injury or damage may result.
Folding/Unfolding the Wheelchair
WARNING
DO NOT sit or transfer into the wheelchair unless it is fully open and the seat rails are fully seated into the seat clamps.
NOTE: For this procedure, refer to FIGURE 6.1.
Unfolding
WARNING
When unfolding the wheelchair, DO NOT position fingers or hands between the pivot links or under the conventional seat rails, otherwise injury or damage may occur.
1.Open the two (2) side frames.
2.Press down on the seat rails with the palms of your hand until the two (2) seat rails sit flush in the seat clamps on the side frames (Detail "A" of FIGURE 6.1).
Folding
1. Lift up on the seat upholstery until the two (2) side frames come together.
| Side Frame |
| Seat Rail |
Pivot |
|
Link | Seat Clamp |
| |
| (DETAIL “A”) |
Detail “A” - Seat Clamp
Seat Rail
Seat Clamp
FIGURE 6.1 Folding/Unfolding the Wheelchair
Xtra™ | 38 | Part No 1026793 |