SECTION
Installing/Removing the Chest Positioning Strap
NOTE: For this procedure, refer to FIGURE 5.3.
1.Remove the two (2) mounting screws and washers securing the back upholstery to the back cane.
2.Do one (1) of the following:
A.To install the chest positioning strap, proceed to STEP 3.
B.Remove the two (2) existing chest positioning strap halves from the back upholstery.
3.Secure the two (2) halves of the new chest positioning strap together.
4.Align the mounting hole on one (1) end of the NEW chest positioning strap with the mounting hole on the back upholstery and back cane.
5.Secure the new chest positioning strap and back upholstery to the back cane with one (1) mounting screw and washer. Torque to
Secure these ends together
Chest Positioning Strap Half
Chest |
|
|
Positioning |
| Washer |
Strap Half |
| |
|
| |
|
| Back |
| Upholstery | |
| Washer | Mounting |
|
| |
| Back Cane | Screws |
|
|
NOTE: Only Hook and Loop style chest positioning strap shown. Auto style chest positioning strap attaches the same way.
FIGURE 5.3 Installing/Removing the Chest
Positioning Strap
NOTE: Ensure strap is oriented properly and not twisted when installing.
6. Repeat STEPS
NOTE: Only hook and loop style chest positioning strap shown. Auto style chest positioning strap attaches the same way.
Xtra™ | 36 | Part No 1026793 |