Leg epilation, Cleaning the epilation heads

2Rub your skin to lift short hairs. For optimum performance hold the ap- pliance at a right angle (90°) against your skin. Guide it in a slow, con- tinuous movement without pressure against the hair growth, in the direc- tion of the switch. The SoftLift™ tips will make sure that even flat lying hair is lifted and removed thoroughly at the root.

As hair can grow in different direc- tions, it may also be helpful to guide the appliance in different directions to achieve optimum results.

Both rollers of the 4-way moving pain softener should always be kept in contact with the skin, allowing the pulsating movements to stimulate and relax the skin for a gentler epilation.

3Leg epilation

(epilation head 2 with 4-way moving pain softener 1)

Epilate your legs from the lower leg in an upward direction. When epilating behind the knee, keep the leg stretched out straight.

4Underarm and bikini line epilation (underarm epilation head B without attachment)

For this specific application, the narrow underarm epilation head has been developed. Thanks to its specific design adapted to the contours of these areas, it provides a gentle and thorough epilation. Please be aware that especially at the beginning these areas are parti- cularly sensitive to pain. With re- peated usage the pain sensation will diminish.

For more comfort, ensure that the hair is at the optimum length of 2-5 mm.

Before epilating, thoroughly clean the respective area to remove residue (like deodorant). Then carefully dab dry with a towel. When epilating the underarm, keep your arm raised up so that the skin is stretched and guide the appliance in different directions.

As skin may be more sensitive directly after epilation, avoid using irritating substances such as deodorants with alcohol.

Cleaning the epilation heads

5After epilating, unplug the appliance

and clean the epilation head used: When cleaning the epilation head 2,

first take off the 4-way moving pain softener 1 and brush out the rollers.

6To clean the tweezer element, use the cleaning brush dipped into alco- hol. Turn the product around and clean the tweezers with the brush while turning the barrel manually.

7Remove the epilation head by pres- sing the release buttons 3on the left and right and pull it off.

Give the top of the housing a quick clean with the brush. Place the epila- tion head and the 4-way moving pain softener back on the housing.

Subject to change without notice

This product conforms to the EMC-Requirements as laid down by the Council Directive 89/336/EEC and to the Low Voltage Regulation (73/23 EEC).