2Rub your skin to lift short hairs. For optimum performance hold the appliance at a right angle (90°) against your skin. Guide it in a slow, continuous movement without pressure against the hair growth, in the direction of the switch.
As hair can grow in different directions, it may also be helpful to guide the appliance in different directions to achieve optimum results.
Both rollers of the massaging rollers clip Ashould always be kept in contact with the skin, allowing the pulsating movements to stimulate and relax the skin for a gentler epilation.
If you are used to epilation and look
for a faster way to efficiently remove hair, attach the EfficiencyPro clip a. It allows maximum skin contact and ensures an optimum usage position.
3Leg epilation (epilation head 2 with
1a or 1b ):
Epilate your legs from the lower leg in an upward direction. When epilating behind the knee, keep the leg stretched out straight.
4Underarm and bikini line epilation (underarm epilation head 8 without attachment):
For this specific application, the narrow underarm epilation head has been developed. Thanks to its specific design adapted to the contours of these areas, it provides a gentle and thorough epilation.
Please be aware that especially at the beginning these areas are particularly sensitive to pain. With repeated usage the pain sensation will diminish. For more comfort, ensure that the hair is at the optimum length of
respective area to remove residue (like deodorant). Then carefully dab dry with a towel. When epilating the underarm, keep your arm raised up so that the skin is stretched and guide the appliance in different directions.
As skin may be more sensitive directly after epilation, avoid using irritating substances such as deodorants with alcohol.
Cleaning the epilation heads
5After epilating, unplug the appliance
and clean the epilation head. First remove the clip used (A or a) and clean it with the brush.
6To clean the tweezer element, use the cleaning brush dipped into alcohol. Clean the tweezers with the brush from the rear side of the epilator head while turning the barrel manually.
7Remove the epilation head by pressing the release buttons 3 on the left and right and pull it off. Give the top of the housing a quick clean with the brush.
Place the epilation head and your preferred clip (A or a) back on the housing.
Subject to change without notice.
This product conforms to the European Directives EMC 89/336/ EEC and Low Voltage 73/23/EEC.
Please do not dispose of the product in the household waste at the end of its useful life. Disposal can take place at a Braun Service Centre or at appropriate collection points provided in your country.
8