•Do not expose the shaver to temperatures of more than 50 °C for longer periods of time.
Display
The pilot light shows that the shaver is connected to the mains.
The display shows the operation mode and charging conditions of the shaver: During charging the display shows the battery capacity symbol increasing by 20% segments and the remaining charging time (flashing):
First charging (4 h):
The display counts down in 20 min. steps.
Subsequent chargings (1 h):
The display counts down in 5 min. steps.
The battery is fully charged. SmartLogic inside monitors the battery and communicates when it is still well charged. Below 10 minutes remaining shaving time, the display shows the minutes left. The «moving» plug symbol indicates that you should charge your shaver. If there is insufficient battery charge for a cordless shave, either recharge the shaver or shave via the power supply cord connected to the mains.
*The display changes to this format when the shaver is in the Clean&Charge.
The SmartLogic inside your shaver automatically monitors the condition of the batteries as well as the charging/dis- charging processes and adapts them to your personal shaving patterns. For instance, if it is your routine to never let the batteries run low, the SmartLogic will recognize this, look for a pause when you are likely to not use the shaver and completely discharge and then recharge your shaver to recondition the batteries (every six months at the most, and only when necessary).
For additional information, press the info key:
press once:
–to display the duration of the last shave
7680
7680
*
11