Tips for the perfect shave
•We recommend that you shave before washing,
as the skin tends to be slightly swollen after washing.
•Hold the shaver at right angles (90°) to the skin.
•Stretch your skin and shave against the direction of beard growth.
•Replace the shaver foil and cutter block every
11/2 years, or when the parts are worn, to ensure optimum shaving performance.
Keeping your shaver in top shape
Automated cleaning
The Braun Clean&Charge takes care of all cleaning and lubrication needs of your shaver. Please refer to the separate use instructions.
If not supplied already with your shaver, the Braun Clean&Charge is available at your dealer or Braun Service Centres.
Manual cleaning
For easy cleaning after each shave, switch the shaver off. Press the release buttons to lift the shaver foil (do not remove the foil completely). Switch on the shaver for approx.
For a thorough cleaning (weekly), remove the shaver foil and tap it out on a flat surface. Using the brush, clean the cutter block and the inner area of the pivoting head. About every four weeks, clean the cutter block with Braun cleaning agents.
If your skin is very dry and you notice a reduced operation time of the shaver or if the display shows «oil!», apply a drop of light machine oil onto the shaver foil.
Replacing the shaving parts
0 |
1 |
0 |
1 |
The shaver foil and cutter block are precision parts that, in time, are subject to wear. Replace your foil and cutter block every 18 months and get a 25% better shave.* (Shaver foil and cutter block: part No. 7000. Available at your dealer or Braun Service Centres.)
(* Overall evaluation from Braun users comparing their shave with new parts and those used for 18 months.)
Syncro
7000
7000
13