BenQ SP920P user manual Selecting the aspect ratio, About the aspect ratio

Page 30

English

Selecting the aspect ratio

The 'aspect ratio' is the ratio of the image width to the image height. Most analog TV and computers are in 4:3 ratio, and digital TV and DVDs are usually in 16:9 ratio.

With the advent of digital signal processing, digital display devices like this projector can dynamically stretch and scale the image output to a different aspect than that of the image input signal.

To change the projected picture ratio (no matter what aspect the source is):

Using the remote control

1. Press ASPECT to show the current setting.

2. Press ASPECT repeatedly to select an aspect ratio to suit the format of the video signal and your display requirements.

• Using the OSD menu

1. Press MENU/EXIT and then press / until the DISPLAY menu is highlighted.

2.Press to highlight Aspect Ratio.

3.Press / to select an aspect ratio to suit the format of the video signal and your display requirements.

About the aspect ratio

In the pictures below, the black portions are inactive areas and the white portions are active areas.

1.4:3: Scales an image so that it is displayed in the center of the screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV and 4:3 aspect DVD movies, as it displays them without aspect alteration.

2.16:9: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like high definition TV, as it displays them without aspect alteration.

3.Auto: Scales an image proportionally to fit the projector's native resolution in its horizontal width. This is suitable for the incoming image which is neither in 4:3 nor 16:9 and you want to make most use of the screen without altering the image's aspect ratio.

4:3 picture

16:9 picture

16:10 picture

15:9 picture

4.Real: The image is projected as its original resolution, and with

no pixel conversion. For input signals with lower resolutions, the projected image will display smaller than if resized to full screen.

You could adjust the zoom setting or move the projector towards

4:3 picture

 

the screen to increase the image size if necessary. You may also

 

need to refocus the projector after making these adjustments.

 

 

 

 

16:9 picture

OSD menus can be displayed on those unused black areas.

30 Operation

Image 30
Contents Welcome SP920P Digital ProjectorTable of contents Cigarette smoke may contaminate optical Important safety instructionsWith all windows rolled up 3000 m 10000 feetImportant safety instructions Ceiling mounting the projector Projector features IntroductionShipping contents RGB signal output socket Projector exterior viewFront/upper side Rear/lower side Controls and functions ProjectorMode MuteOperating the Laser pointer Remote control effective rangeMaking the remote control a wired control Operating the projector from the frontPositioning your projector Choosing a locationObtaining a preferred projected image size Select your screen size Projection dimensions ZoomConnection Connecting a computer or monitorConnecting a computer To connect the projector to a notebook or desktop computerConnecting a monitor To connect the projector to a monitorWith a VGA cable With a VGA to DVI-A cable Best video quality Connecting Video source devicesConnecting Audio Better video qualityConnecting a Hdmi source device To connect the projector to a Hdmi source deviceConnecting a DVI-D source device To connect the projector to a DVI-D source deviceWith a Component Video cable Connecting a Component Video source deviceTo connect the projector to a Component Video source device With a Component Video to VGA D-Sub adaptor cableConnecting an S-Video or a composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorUse / to highlight the System Setup Basic menu Using the On-Screen Display OSD menusUsing a security cable lock Securing the projectorIf you forget the password Utilizing the password functionSetting a password To leave the OSD menu, press MENU/EXITDisabling the password function Entering the password recall procedureChanging the password Confirm the new password by re-entering the new passwordSwitching input signal Changing Color SpaceAuto-adjusting the image Adjusting the projected imageAdjusting the projection angle Fine-tuning the image size and clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio About the aspect ratioPC input signals D-Sub/Comp. analog RGB and DVI-D DVI-D Using Wall ColorSelecting a picture mode Optimizing the imageFine-tuning the image quality in user modes Adjusting Brilliant Color Selecting a color temperature3D Color Management Press MENU/EXIT to exit and save the settings Setting the presentation timerRepeat steps 3 to 6 for other color adjustments Follow these steps to utilize this functionUsing the remote control To cancel the timer, perform the following stepsHow to use the Timer ON/SHOW key? Using the OSD menuHiding the image Utilizing FAQ functionPossible solutions To exit the OSD menu, press MENU/EXIT Freezing the imageLocking control keys Press / or go to the System Setup Basic Panel Key LockTo activate the High Altitude Mode Operating in a high altitude environmentTurning off the Power on/off ring tone Adjusting the soundAdjusting the sound level Creating your own startup screenSetting the lamp mode Personalizing the On-Screen Display OSD menusShutting down the projector On-Screen Display OSD Menus Menu structureMain menu Sub-menu Options Setup Basic AdvancedDescription of each menu Blank Timer Presentation TimerAuto Power Off Sleep TimerReset All Settings Lamp SettingsSecurity Settings FAQ-Image InstallationMaintenance Care of the projectorLamp information Extending lamp life Setting Lamp Mode as Dual-ReliableSetting Auto Power Off Timing of replacing the lampReplacing the lamp Screwdriver Remove the lamp cover from the projectorRestart the projector Resetting the corresponding lamp timerGo to the System Setup Advanced Lamp Settings menu Way into the projectorIndicators Troubleshooting Specifications Projector specificationsDimensions Supported timing for Component-YPbPrinput Timing chartSupported timing for Analog RGB input Supported timing for Video and S-Video inputsSupported timing for DVI-D and Hdmi Hdcp input ResolutionHorizontal Vertical Pixel Frequency Mode Frequency kHz Frequency Hz MHzOther information Regulation statementsEnglish