BenQ SP920P Adjusting Brilliant Color, Selecting a color temperature, 3D Color Management

Page 33

Adjusting Brilliant Color

Highlight Brilliant Color in the PICTURE menu and select by pressing / on the projector or remote control.

This feature utilizes a new color-processing algorithm and system level enhancements to enable higher brightness while providing truer, more vibrant colors in picture. It enables a greater than 50% brightness increase in mid- tone images, which are common in video and natural scenes, so the projector reproduces images in realistic and true colors. If you prefer images with that quality, select On. If you don’t need it, select Off.

On is the default and recommended selection for this projector. When Off is selected, the Color Temperature function is not available.

Selecting a color temperature

Highlight Color Temperature in the PICTURE menu and adjust the values by pressing / on the projector or remote control.

There are four color temperature* settings available.

1.T1: With the highest color temperature, T1 makes the image appear the most bluish white than other settings.

2.T2: Makes images appear bluish white.

3.T3: Maintains normal colorings for white.

4.T4: Makes images appear reddish white.

*About color temperatures:

There are many different shades that are considered to be "white" for various purposes. One of the common methods of representing white color is known as the “color temperature”. A white color with a low color temperature appears to be reddish white. A white color with a high color temperature appears to have more blue in it.

3D Color Management

In most installation situations, color management will not be necessary, such as in classroom, meeting room, or lounge room situations where lights remain on, or where building external windows allow daylight into the room.

Only in permanent installations with controlled lighting levels such as boardrooms, lecture theaters, or home theaters, should color management be considered. Color management provides fine color control adjustment to allow for more accurate color reproduction, should you require it.

Proper color management can only be achieved under controlled and reproducible viewing conditions. You will need to use a colorimeter (color light meter), and provide a set of suitable source images to measure color reproduction. These tools are not provided with the projector, however, your projector supplier should be able to provide you with suitable guidance, or even an experienced professional installer.

The Color Management provides six sets (RGBCMY) of colors to be adjusted. When you select each color, you can independently adjust its range and saturation according to your preference.

If you have purchased a test disc which contains various color test patterns and can be used to test the color presentation on monitors, TVs, projectors, etc. You can project any image from the disc on the screen and enter the 3D Color Management menu to make adjustments.

To adjust the settings:

1.Go to the PICTURE menu and highlight 3D Color Management.

2.Press ENTER on the projector or remote control and the 3D Color Management page displays.

3.Highlight Primary Color and press / to select a color from among Red, Yellow, Green, Cyan, Blue, or Magenta.

4.Press to highlight Hue and press / to select its range. Increase in the range will include colors consisted of more proportions of its two adjacent colors.

English

Operation 33

Image 33
Contents SP920P Digital Projector WelcomeTable of contents With all windows rolled up Important safety instructionsCigarette smoke may contaminate optical 3000 m 10000 feetImportant safety instructions Ceiling mounting the projector Introduction Projector featuresShipping contents RGB signal output socket Projector exterior viewFront/upper side Rear/lower side Projector Controls and functionsMute ModeMaking the remote control a wired control Remote control effective rangeOperating the Laser pointer Operating the projector from the frontChoosing a location Positioning your projectorObtaining a preferred projected image size Select your screen size Zoom Projection dimensionsConnecting a computer Connecting a computer or monitorConnection To connect the projector to a notebook or desktop computerConnecting a monitor To connect the projector to a monitorWith a VGA cable With a VGA to DVI-A cable Connecting Audio Connecting Video source devicesBest video quality Better video qualityTo connect the projector to a Hdmi source device Connecting a Hdmi source deviceTo connect the projector to a DVI-D source device Connecting a DVI-D source deviceTo connect the projector to a Component Video source device Connecting a Component Video source deviceWith a Component Video cable With a Component Video to VGA D-Sub adaptor cableTo connect the projector to an S-Video/Video source device Connecting an S-Video or a composite Video source deviceStarting up the projector OperationUsing a security cable lock Using the On-Screen Display OSD menusUse / to highlight the System Setup Basic menu Securing the projectorSetting a password Utilizing the password functionIf you forget the password To leave the OSD menu, press MENU/EXITChanging the password Entering the password recall procedureDisabling the password function Confirm the new password by re-entering the new passwordChanging Color Space Switching input signalAdjusting the projection angle Adjusting the projected imageAuto-adjusting the image Fine-tuning the image size and clarityCorrecting keystone Magnifying and searching for detailsAbout the aspect ratio Selecting the aspect ratioSelecting a picture mode Using Wall ColorPC input signals D-Sub/Comp. analog RGB and DVI-D DVI-D Optimizing the imageFine-tuning the image quality in user modes Adjusting Brilliant Color Selecting a color temperature3D Color Management Repeat steps 3 to 6 for other color adjustments Setting the presentation timerPress MENU/EXIT to exit and save the settings Follow these steps to utilize this functionHow to use the Timer ON/SHOW key? To cancel the timer, perform the following stepsUsing the remote control Using the OSD menuPossible solutions To exit the OSD menu, press MENU/EXIT Utilizing FAQ functionHiding the image Freezing the imageTo activate the High Altitude Mode Press / or go to the System Setup Basic Panel Key LockLocking control keys Operating in a high altitude environmentAdjusting the sound level Adjusting the soundTurning off the Power on/off ring tone Creating your own startup screenPersonalizing the On-Screen Display OSD menus Setting the lamp modeShutting down the projector On-Screen Display OSD Menus Menu structureMain menu Sub-menu Options Advanced Setup BasicDescription of each menu Auto Power Off Presentation TimerBlank Timer Sleep TimerSecurity Settings Lamp SettingsReset All Settings FAQ-Image InstallationMaintenance Care of the projectorLamp information Setting Auto Power Off Setting Lamp Mode as Dual-ReliableExtending lamp life Timing of replacing the lampScrewdriver Remove the lamp cover from the projector Replacing the lampGo to the System Setup Advanced Lamp Settings menu Resetting the corresponding lamp timerRestart the projector Way into the projectorIndicators Troubleshooting Specifications Projector specificationsDimensions Supported timing for Analog RGB input Timing chartSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsHorizontal Vertical Pixel Frequency Mode ResolutionSupported timing for DVI-D and Hdmi Hdcp input Frequency kHz Frequency Hz MHzRegulation statements Other informationEnglish