BenQ SP920P Quick Auto Search, Color Space, Conversion, Presentation Timer, Language, Blank Timer

Page 44

English

 

FUNCTION

 

(default setting/value)

3 Quick Auto Search

.

(On)

SOURCE menu

(RGB)

 

Color Space

 

Conversion

 

Presentation Timer

 

Language

4.

Projector Position

SYSTEM

(Front Table)

Auto Power Off

 

SETUP:

(Disable)

Blank Timer

 

 

(Disable)

Basic

Panel Key Lock

(Off)

 

menu

Sleep Timer

(Disable)

 

 

Splash Screen

 

(BenQ logo)

 

My Screen

 

Quick Cooling

 

(Off)

5

 

.SYSTEM Advanced

High Altitude Mode

 

SETUP: menu

(Off)

Audio Settings

 

Menu Settings

DESCRIPTION

See "Switching input signal" on page 27 for details.

See "Changing Color Space" on page 27 for details.

Reminds the presenter to finish the presentation within a certain time frame. See "Setting the presentation timer" on page 34 for details.

Sets the language for the On-Screen Display (OSD) menus. See "Using the On-Screen Display (OSD) menus" on page 24 for details.

The projector can be installed on a ceiling or behind a screen, or with one or more mirrors. See "Choosing a location" on page 12 for details.

Allows the projector to turn off automatically if no input signal is detected after a set period of time. See "Setting Auto Power Off" on page 47 for details.

Sets the image blank time when the Blank feature is activated, once elapsed the image will return to the screen. See "Hiding the image" on page 36 for details.

Disables or enables all panel key functions except Power on the projector and keys on the remote control. See "Locking control keys" on page 37 for details.

Sets the auto-shutdown timer. The timer can be set to a value between 30 minutes and 12 hours.

Allows you to select which logo screen will display during projector start- up. Four options are available: BenQ logo, Black screen, Blue screen or My Screen.

Captures and stores the projected picture as My Screen. See "Creating your own startup screen" on page 38 for details.

Enables or disables the Quick Cooling function. Selecting On enables the function and projector cooling time will be shortened from a normal 90- second duration to approximately 30 seconds.

If you attempt to restart the projector right after the 30-second quick cooling process, it will rerun its cooling fans for approximately 60 seconds before energizing the lamp.

A mode for operation in high altitude areas. See "Operating in a high altitude environment" on page 37 for details.

Mute (Off)

Volume (5)

Power on/off ring tone (On)

See "Adjusting the sound" on page 38 for details.

Menu Display Time (5 sec)

Sets the length of time the OSD will remain active after your last key press. The range is from 5 to 30 seconds in 5-second increments.

Menu Position (Center)

Sets the On-Screen Display (OSD) menu position.

44 Operation

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Welcome SP920P Digital ProjectorTable of contents Important safety instructions With all windows rolled upCigarette smoke may contaminate optical 3000 m 10000 feetImportant safety instructions Ceiling mounting the projector Projector features IntroductionShipping contents Front/upper side Rear/lower side RGB signal output socketProjector exterior view Controls and functions ProjectorMode MuteRemote control effective range Making the remote control a wired controlOperating the Laser pointer Operating the projector from the frontPositioning your projector Choosing a locationObtaining a preferred projected image size Select your screen size Projection dimensions ZoomConnecting a computer or monitor Connecting a computerConnection To connect the projector to a notebook or desktop computerWith a VGA cable With a VGA to DVI-A cable Connecting a monitorTo connect the projector to a monitor Connecting Video source devices Connecting AudioBest video quality Better video qualityConnecting a Hdmi source device To connect the projector to a Hdmi source deviceConnecting a DVI-D source device To connect the projector to a DVI-D source deviceConnecting a Component Video source device To connect the projector to a Component Video source deviceWith a Component Video cable With a Component Video to VGA D-Sub adaptor cableConnecting an S-Video or a composite Video source device To connect the projector to an S-Video/Video source deviceOperation Starting up the projectorUsing the On-Screen Display OSD menus Using a security cable lockUse / to highlight the System Setup Basic menu Securing the projectorUtilizing the password function Setting a passwordIf you forget the password To leave the OSD menu, press MENU/EXITEntering the password recall procedure Changing the passwordDisabling the password function Confirm the new password by re-entering the new passwordSwitching input signal Changing Color SpaceAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarityMagnifying and searching for details Correcting keystoneSelecting the aspect ratio About the aspect ratioUsing Wall Color Selecting a picture modePC input signals D-Sub/Comp. analog RGB and DVI-D DVI-D Optimizing the imageFine-tuning the image quality in user modes 3D Color Management Adjusting Brilliant ColorSelecting a color temperature Setting the presentation timer Repeat steps 3 to 6 for other color adjustmentsPress MENU/EXIT to exit and save the settings Follow these steps to utilize this functionTo cancel the timer, perform the following steps How to use the Timer ON/SHOW key?Using the remote control Using the OSD menuUtilizing FAQ function Possible solutions To exit the OSD menu, press MENU/EXITHiding the image Freezing the imagePress / or go to the System Setup Basic Panel Key Lock To activate the High Altitude ModeLocking control keys Operating in a high altitude environmentAdjusting the sound Adjusting the sound levelTurning off the Power on/off ring tone Creating your own startup screenSetting the lamp mode Personalizing the On-Screen Display OSD menusShutting down the projector Main menu Sub-menu Options On-Screen Display OSD MenusMenu structure Setup Basic AdvancedDescription of each menu Presentation Timer Auto Power OffBlank Timer Sleep TimerLamp Settings Security SettingsReset All Settings FAQ-Image InstallationLamp information MaintenanceCare of the projector Setting Lamp Mode as Dual-Reliable Setting Auto Power OffExtending lamp life Timing of replacing the lampReplacing the lamp Screwdriver Remove the lamp cover from the projectorResetting the corresponding lamp timer Go to the System Setup Advanced Lamp Settings menuRestart the projector Way into the projectorIndicators Troubleshooting Dimensions SpecificationsProjector specifications Timing chart Supported timing for Analog RGB inputSupported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsResolution Horizontal Vertical Pixel Frequency ModeSupported timing for DVI-D and Hdmi Hdcp input Frequency kHz Frequency Hz MHzOther information Regulation statementsEnglish
Top Page Image Contents