Operator's Manual | First Edition · Third Printing |
|
|
|
|
TRANSPORT AND LIFTING INSTRUCTIONS
Observe and Obey:
Only qualified riggers should rig and lift the machine.
Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the machine weight. See the serial plate for the machine weight.
Turntable |
|
|
|
|
|
|
|
|
|
|
|
|
| Chassis |
Lifting |
|
|
|
|
|
|
|
|
|
|
|
|
| Lifting |
| ||||||||||||||
Point |
|
|
|
|
|
|
|
|
|
|
|
|
| Points (2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lifting Instructions
Fully lower and retract both the primary and secondary booms. Remove all loose items on the machine.
Rotate the turntable 90 degrees.
Determine the center of gravity of your machine using the measurements on the pictures on this page.
Attach the rigging only to the designated lifting points on the machine.
Attach the rigging to the 2 chassis lifting points farthest from the turntable lifting point.
Adjust the rigging to prevent damage to the machine and to keep the machine level.
39.61 in / 1 m
34.18 in
86.8 cm
56 in |
1.42 m |
30 | Genie | Part No. 82258 |