Genie Z-80, Z-60 Check Engine Light, Operating Envelope Indicator Lights, Stopping the Engine

First Edition · Third Printing Operator's Manual

Check Engine Light

Light on and engine stopped: Tag the machine and remove from service.

Light on and engine still running: Contact service personnel within 24 hours.

Operating Envelope Indicator Lights

The operating envelope indicator lights will come on to notify the operator that a function has been interrupted and/or an action is required by the operator.

Lower Primary Boom indicator light flashing: Lower the primary boom until the indicator light is off.

Machine Not Level indicator light flashing: The tilt alarm will be sounding when this light is flashing. Move the machine to a firm level surface.

Platform Not Level indicator light flashing: The tilt alarm will

be sounding when this light is

flashing. The Platform Level toggle switch will only work in the direction that will level the platform. Level the platform until the indicator light is off.

OPERATING INSTRUCTIONS

Stopping the Engine

Push in the red Emergency Stop button and turn the key switch to the off position.

After Each Use

1Select a safe parking location—firm level surface, clear of obstruction and traffic.

2Retract and lower the boom to the stowed position.

3Rotate the turntable so that the boom is between the circle-end wheels.

4Turn the key switch to the off position and remove the key to secure from unauthorized use.

5Chock the wheels.

Part No. 82258 Genie Z-80/60 25