Invacare Ranger IIJR Assembling Ranger II MWD, Unfolding/Folding Integrated Sling Seats Figure

PROCEDURE 14 MWD WHEELCHAIRS

M W D

W

H

E

E

L

C H A I R S

This Procedure Includes the Following:

Assembling Ranger II MWD

When to Charge Batteries

Charging Batteries

Replacing Batteries

Installing/Removing Battery Boxes

Battery Tray

Replacing Wiring Harness Stabilizer Identification Adjusting Stabilizer Springs Adjusting Stabilizer for User Preference Replacing Stabilizer Cylinders Replacing Stabilizer Wheels Replacing Stabilizer Cylinder Springs Repositioning Motors

Replacing Clutch Handles - R2BASIC AND R2250 SERIES

Replacing Motor/Gearbox - R2BASIC AND R2250 SERIES

Replacing Motor/Gearbox - R2STANDARD

Install the electronics. Refer to REPOSITIONING MKIV JOYSTICK in PROCEDURE 7 of this manual.

WARNING

After ANY adjustments, repair or service and BE- FORE use, make sure that all attaching hardware is tightened securely - otherwise injury or dam- age may result.

ASSEMBLING RANGER II MWD

WARNING

The weight of the wheelchair without the user and batteries is still between 100 and 116 lbs. Use proper lifting techniques (lift with your legs) to avoid injury. Extreme caution is advised when it is necessary to move an UNOCCUPIED power wheelchair. Invacare recommends using two (2) assistants and making thorough preparations. Make sure to use ONLY secure, non-detachable parts for hand-hold supports.

Keep hands and fingers clear of moving parts to avoid injury.

Unfolding/Folding Integrated Sling Seats (FIGURE 1)

UNFOLDING.

1.Push down on the seat rails until the seat rails are positioned in the seat guides.

2.Assemble the wheelchair. Refer to FIGURE 1.

3.If necessary, install the shrouds. Refer to REMOV- ING/INSTALLING SHROUDS in PROCEDURE 10 of this manual.

Seat Rails

Seat Guides

Install the footrests/legrests. Refer to INSTALLING/RE- MOVING FOOTRESTS or INSTALLING ELEVATING LEGRESTS in PROCEDURE 3 of the owner's manual, part number 1080722.

Adjust the stabilizers. Refer to ADJUSTING STABILIZ-

ERS in this procedure of the manual.

Install the battery tray and batteries. Refer to INSTALL- ING/REMOVING BATTERY TRAY and INSTALLING/ REMOVING BATTERY BOXES in this procedure of the manual.

FIGURE 1 - ASSEMBLING RANGER II MWD - INTEGRATED SLING SEATS

64