Leica RM2245 instruction manual Startup, Standard delivery

Page 16

4.	Startup
4.1	Standard delivery
The Leica RM2245 standard delivery includes:
	1 Leica RM2245 basic instrument, without orientation	0501 38178
	1 handwheel, complete	0501 38181
	1 external control panel	0501 38179
	1 section waste tray	0502 37931
	1 set of power cables consisting of:
	1 power cable for Germany	0411 36958
	1 power cable for USA/Canada/Japan	0411 36960
	1 power cable for UK ST/BU F-5A	0411 36959
	1 tool set – consisting of:	0502 37965
	1 Allen key with handle, size 5	0194 04760
	1 Allen key with handle, size 4	0194 04782
	1 Allen key size 3	0222 04138
	1 screwdriver 3x50, 186 long	0170 11568
	1 bottle (50 ml) of oil for drives, type 405	0336 06086
	2 micro-fuses 1.0 AT	6943 01001
	1 brush w/magnet	0183 40426
	1 dust protective cover	0212 30350
	1 Instruction manual	0700 37113

The accessories ordered are included in a separate box.

Carefully check the delivery against the packing list and the deliv- ery note. Should there be any discrepancy, please contact the Leica selling unit handling your order.

16	Instruction manual V 1.4 – 02/2007

Image 16

Contents Leica RM2245 Page Leica Microsystems Nussloch GmbH Table of Contents Table of Contents Symbols in the text and their meanings Important notesQualification of personnel Intended use of instrumentSafety Safety notesPersonal safety precautions Safety Integrated safety devices Safety Overview instrument components Instrument components and specificationsLeica RM2245 Instrument specifications Rear side of instrumentDimensions and weight Basic instrument Technical data GeneralControl panel Microtome Startup Standard deliveryInstallation site requirements Setting up the instrumentElectrical connections Assembling the handwheelChecking the voltage 23 24 Switching on the instrument Operating elements and their functions OperationInstrument control panel Control panel Display and control elements Trimming mode Sectioning modeHow to activate the Step function Specimen retraction Mum of 100 μm using the buttons on the control panel Display 4 lights upIndication of remaining horizontal feed Step function is disabled in the remaining feed rangeObject head Directional fixture for specimen clamps To release the clamp, turn the eccentric lever 29 forwardsImportant! Never turn the screw more than 1/2 Turn at a time Inserting the knife holder Inserting the universal cassette clamp Adjusting the clearance angle Example Enlarged detail showing a clearance angle settingClamping the specimen Clamping the knife / disposable bladeCutting into the specimen trimming Sectioning Changing the specimen or interrupting sectioning Finishing daily routineOptional accessories Assembly for fixture for specimen clampsRigid fixture for specimen clamps Directional fixture for specimen clampsFine-directional fixture for specimen clamps Quick clamping system Standard specimen clamp Specimen clamps and holdersVee insert Foil clamp type Optional accessories Universal cassette clamp Universal cassette clamp, ice-cooledSuper mega-cassette clamp Holder for round specimens Optional accessories Knife holder E/E-TC To clamp the blade, rotate clamping lever 10 back upwardsOptional accessories Use Knife holder N/NZ Optional accessories Section waste tray BacklightingFreezer pack TrayInstrument Assembling the universal microscope carrier Universal microscope carrierAttach baseplate Attach horizontal arm Magnifying lens Plug the power plug into the power socket Cold light source Fiber-optic light guideOptional accessories Ordering informationLeica CLS Cold light sourcesFiber-optic light guide Error reports Customized solutionsInstrument malfunctions Malfunctions, possible causes and troubleshooting Problem Possible cause Corrective actionPossible faults Cleaning the instrument Cleaning and maintenanceClean using an alcohol-based solution or acetone Cleaning and maintenance Maintenance Replacing fusesMaintenance instructions Lubricating the instrument Warranty and service WarrantyWe herewith declare, in exclusive responsibility, that EC Declaration of ConformityDag Graupner Managing Director