Leica DM4000B, DM4000M Important Notes about this Manual, Text symbols and their meanings → p

Page 7

1. Important Notes about this Manual

1. Important Notes about this Manual

Caution!

This operating manual is an essential com- ponent of the microscope, and must be read carefully before the microscope is put into operation or used.

Text symbols and their meanings:

(1.2)

→p. 20

!

This operating manual contains important in- structions and information for the operational safety and maintenance of the microscope and accessories. Therefore, it must be kept and taken care of.

Numbers in parentheses, such as "(1.2)", corre- spond to illustrations (in the example, Figure 1, Item 2).

Numbers with pointer arrows (for example

→p.20), point to a certain page of this manual.

Special safety instructions are indicated with the triangle symbol shown here, and have a gray background.

Caution! The microscope and accessories can be damaged when operated incorrectly.

 

Explanatory note.

*

Item not contained in all configurations.

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Leica DM4000 B Page Leica DM4000 B Copyrights CopyrightsContents Imaging Procedure for Essential Explanatory note Text symbols and their meanings → pImportant Notes about this Manual Important Notes about this ManualMicroscope Safety NotesSafety Notes General Safety NotesOvervoltage category Pollution degree See enclosed manual Safety Notes Supply unit ebqAmbient temperature 15-35C Relative humidity Ambient temperature 15-35COverview of the Instrument CTR5000 Control PanelsComputer Interface Software Tools13 12 11 10 9 Overview of the Instrument Unpacking the Microscope Unpacking the MicroscopeTransport Installation locationRemove all moving or loose parts This case, read Chapter Optional accessories → p AssemblyAssembling the Microscope Assembling the stage Stage clamp Dovetail guide Assembly StageConnect the condenser over the connection 8.1 with the stand Assembly CondenserObjectives Assembly Tube and EyepiecesRemove the lamp’s dust cover 107/2 Lamp HousingLamp housing 18.4 Close the lamp housing and retighten the fas- tening screws200 hrs Please regard the data sheets of the burnersType High-pressure mercury burner alternating current 100 hrsHg 50 burner Install the burner in mirror image fashionXe 75 burner Rear side of the ebq 100 supply unit Lamp connection Connect the lamp housing to the power supplyEquipping the Incident Light filter turret Polarizer and AnalyzerMotorized polarizer Assembly ICT/P transmitted light polarizerTransmitted light and incident light analyzer DIC Prisms Optional AccessoriesMotorized analyzer Identification Sheet for the correct positionBooster Lens / Excitation Manager Assembly ErgomoduleMirror Housing Connection to the Power SupplyConnection to the CTR5000 Electronics Box Functional Principle Switching on the MicroscopeStartup StartupCombination mode Phase contrast Transmitted lightSwitch through all transmitted light processes Switch through fluorescence cubes in clockwise fashionFunction key Meaning Display Leica DM4000 B/DM4000 M Function Keys Light IntensityDiaphragms Contrast Method MagnificationAbbreations are listed on p.32f Defined Function Keys on the left side of the standKöhler Illumination Insert the specimen in the stage’s specimen holder Set the light intensity using the INT keysKöhler Illumination Checking Phase Contrast RingsPhlr Light ring centering Clamping screw Never look directly into the light path Cube. See → p Turn the reflector into the light pathCentering the 12 V 100 W Halogen Lamp Centering the Hg 50 W mercury lamp Focus the direct filament image with the col- lectorTurn off the microscope before exchanging Reflector cubeCentering the Hg 100 W and Xe 75 W Focus the direct image with the collectorMercury lamps Startup Startup Operation Torque adjustmentOperation Operation Rotating the Stage FocusingOperation Tubes Adjusting the Viewing DistanceAdjusting the Viewing Angle Adjusting the Eyepiece Extension to the Arm LengthEyepieces with Inlaid Reticle Correction for Vision ProblemsOperation Beam Splitting in Photo Tubes EyepiecesOperation Objectives Follow safety instructions for immersion oilStand Operation For lockable immersion objectivesFor objectives with corrective mounts Magnification ChangerOperation Light Sources Phase Contrast Imaging ProcedureDark Field TL Imaging Procedure for Leica DM4000 B/DM5000 BPolarization TL Mechanical procedureMotorized procedure Combined procedureDifferential Interference Contrast TL Cube or Cube FluorescenceDark Field Imaging Procedure for Leica DM4000 MPolarization Automatic procedureImaging Procedure for Leica DM4000 M Interference Contrast Problem Cause/Remedy Stand Trouble ShootingIllumination → p Trouble Shooting Problem Cause/Remedy Bright FieldDisplay Problem Cause/Remedy PolarizationCare of the Microscope Handling Acids and Bases Cleaning Glass SurfacesCleaning Objectives Removing Immersion OilWear and Spare Parts Essential Wear and Spare PartsAbbreviations and Pictograms Abbreviations and PictogramsIndex IndexEU Declaration of Conformity EU Declaration of Conformity
Related manuals
Manual 164 pages 54.45 Kb
Top Page Image Contents