Mitel 5330 manual Cordless Handset LEDs, LED State, Indicates, Color

Page 48
Cordless Handset LEDs

Mitel 5330/5340 IP Phones – User Guide

Cordless Handset LEDs

The handset has two LEDs:

Blue – indicates the operational status of the handset

Green – indicates the status of the electrical charge of the battery

LED

LED State

Indicates

Color

 

 

Blue

Solid

Handset is muted

 

Blinking

Handset is in pairing mode

 

Winking

Active audio path between Handset and Module

 

Off

No audio path between Handset and Module OR

 

 

Battery is dead

Green

Solid

Battery is fully charged

 

Blinking

Battery is charging

 

Off

When handset is cradled and the LED does not flash or

 

 

illuminate, this indicates an absence of battery power.

 

 

During the first 30 – 60 minutes that the light is off, the

 

 

battery may be trickle charging. If that is the case, the

 

 

LED will resume normal behavior within that 60 minute

 

 

period. If the LED remains off for more than 60 minutes,

 

 

then either the battery is no longer chargeable or there is

 

 

a problem in the charging circuit.

Blinking: LED is On and Off for equal amount of time

Winking: LED is On for a short period of time and Off for a longer period

Checking Battery Level of Cordless Accessories

To check the battery level, do either of the following:

Press Applications, and then press Cordless Devices. The battery level is displayed beside the paired accessory.

Press Applications, then Cordless Devices, and then press the key for the cordless accessory. The battery level is displayed along with protocol, firmware, hardware, and IPEI information.

Replacing Batteries in Cordless Accessories

Note: The cordless handset battery is not user-replaceable.

Viewing Cordless Accessory Information

To view cordless accessory protocol, firmware, and hardware information:

Press Applications, then Cordless Devices, and then press the key for the cordless accessory. The battery level is displayed along with protocol, firmware, hardware, and IPEI information.

42

Image 48
Contents SX-200 IP Communications Platform 5330 IP and 5340 IP Phones User GuideMITEL TRADEMARKS Mitel 5330 IP and 5340 IP Phones - User GuideTABLE OF CONTENTS USING YOUR PHONE APPLICATIONSTips For Your Comfort And Safety Using Your Default Phone Window And KeysUSING YOUR PHONE WITH CORDLESS MODULE & ACCESSORIES Using Other FeaturesUsing Your Phone With The 5310 IP Conference Unit Using the Cordless HandsetMitel 5330/5340 IP Phones - User Guide Page ABOUT YOUR PHONE The 5330 IP PhoneFeature The 5340 IP PhoneElements of Your Phone FunctionRing/Message Indicators When indicator is …it means that … Tips For Your Comfort And Safety Adjust the viewing angleDont cradle the handset Protect your hearingUsing Your Default Phone Window And Keys Getting Started with Your Phone5330 and 5340 IP Phone Windows 5330 and 5340 IP Phone Default Window and Keys Message WaitingConference Unit Programming Features on Your KeysUSING YOUR PHONE APPLICATIONS Using the Settings ApplicationUsing the Dial Pad to Enter Information Using the Onscreen Keyboard to Enter InformationCustomizing Your Phone CharactersSpecify User Information 2. Press User Information 3. Press Edit NameSpecify Language 2. Press LanguagesPress Play Error Tone 2. Press Brightness and ContrastSpecify Audio Feedback Options 2. Press Audio FeedbackAdjust Ringer Volume and Pitch 3. Press Ring AdjustPress Ring Adjust 5330 PhoneEnable a Screen Saver 2. Press Screen SaverProgramming Features On Your Keys Features available for programming on programmable keysDefault Label Feature Program Feature Keys Using the Settings Application 2. Press Programmable KeysEdit Key Labels 4. Press Edit Label3. Press Feature Key To program Speed Call Using the Settings Key 1. Press SettingsProgram Superkey to a Key To program Speed CallTo Program Speed Call Using Superkey 5330 Phone Programming Applications on Your Keys6. Press Speed Call Using the People Application Making And Answering Calls3. Press Edit Name 6. Press Edit NumberPress Hang Up or Cancel Phone BookAnswer a call End a callAuto Answer Call Handling HoldMute TransferProgramming Call Forward ConferenceSwap Call ForwardingUsing Other Features Account CodesAttendant Call Hold - Remote Retrieve Auto Latch Microphone Callback1. Press Call Me Back Call Forward - Remote I Am HereCall Logging Call History 3. Press Call LoggingCall Park Call PickupDirect Paging - Handsfree Answerback Enabled CamponDirect Paging Direct Paging - Handsfree Answerback Disabled Phone state before Page arrivesTo answer the Direct Page To answer the Direct Page indicated by single burst of tone Do Not DisturbGroup Listen Group Paging / Meet Me Answer Headset OperationMake Busy Messaging - Advisory4. Press Turn Msg On 5340 Phone 3. Press Turn Msg OfMessaging - Cancel Callback Music3. Press Msgs/Sent 4. Press Erase Msg 5. Press Superkey Night AnswerOverride Intrude PagingRecord a Call Reminder 3. Press ReminderSpeed Call Using Your Phone With The 5310 IP Conference Unit Access the Conference ControllerAdjust the conference unit volume Trunk FlashUsing your Phone with Cordless Module & Accessories Figure 1. Cordless Module and Accessories on 5300 Series PhoneFigure 2. Rear view Elements of Your Cordless Module and Accessories Feature See FigurePairing the Cordless Module and Accessories Pairing a Cordless Accessory with the Cordless ModuleHandset/Headset Combinations Cordless Module LED Indicators 1. Press Applications and then press Cordless DevicesBlue LED Blinking LED is On and Off for equal amount of timeUsing the Cordless Handset Figure 3. Cordless Handset on 5300 Series PhoneElements of the Cordless Handset Dialing - Auto Dial Disabled Dialing - Auto Dial EnabledHang up Alerting Tones and LEDsChecking Battery Level of Cordless Accessories Replacing Batteries in Cordless AccessoriesViewing Cordless Accessory Information Cordless Handset LEDsUsing the Cordless Headset Elements of the Cordless HeadsetHeadset Alerting Tones and LEDs Cordless Headset LEDs LED ColorUsing the Cordless Devices Application Low Battery LevelPress Applications and then press Cordless Devices Viewing Cordless Module InformationUsing a Cordless Device as a Remote Control 2. Press Auto Dial
Related manuals
Manual 26 pages 17 Kb Manual 115 pages 204 b Manual 97 pages 48.5 Kb Manual 58 pages 63.27 Kb Manual 66 pages 35.7 Kb

5330 specifications

The Mitel 5330 is a sophisticated IP phone designed to meet the communications needs of modern businesses. Offering a combination of advanced technology and user-friendly features, the Mitel 5330 is ideal for office environments where high-quality communication is essential.

At its core, the Mitel 5330 leverages Voice over Internet Protocol (VoIP) technology, allowing for seamless connectivity over the internet. This technology enhances voice clarity and reduces communication costs by utilizing existing network infrastructure instead of traditional phone systems. The phone utilizes the SIP (Session Initiation Protocol) standard, ensuring interoperability with various VoIP platforms.

One of the standout features of the Mitel 5330 is its extensive display. With a backlit graphical interface, users can easily navigate through menus and access information quickly. The phone typically includes a high-definition color display that enhances visibility, making it convenient for users to manage calls and access features.

The Mitel 5330 is equipped with programmable keys that enhance efficiency, allowing users to create shortcuts for frequently used functions, such as speed dialling or call transfer. This customizability allows employees to tailor the phone to their specific needs, increasing productivity in the workplace.

Additionally, the Mitel 5330 supports a wide range of call management features, including call hold, call forwarding, and three-way calling. These functionalities streamline communication processes, enabling teams to work collaboratively and efficiently. The phone also supports voicemail integration, ensuring that users never miss an important message.

Built-in audio technologies, such as wideband audio and high-definition sound quality, contribute to crystal-clear voice communication, minimizing misunderstandings during calls. Furthermore, the phone often includes a hands-free speakerphone option, enhancing flexibility for users who may need to multitask while conversing.

In terms of connectivity, the Mitel 5330 typically features various ports, including Ethernet connections, allowing for easy integration into existing network setups. Its robust architecture ensures reliability, even in demanding office environments.

Overall, the Mitel 5330 represents a powerful solution for businesses seeking a reliable, feature-rich IP phone. Its combination of advanced technology, user-friendly features, and high call quality makes it an excellent choice for organizations looking to improve their communication capabilities. With its focus on efficiency and performance, the Mitel 5330 can significantly enhance workplace productivity.