
Using Advanced Phone Features | 4 |
| |
Using the Interactive Voice Response Menu on the Cisco SPA501G |
|
|
|
|
|
Number | Option |
|
|
73738 | Restore the phone to the factory default software and settings. |
| Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and |
| begin the restore process. |
|
|
87778 | Restore the phone’s user settings to the default. (Clears all user settings |
| such as speed dials.) |
| Enter 1 to confirm, or * to exit. If you chose to reset, hang up to exit and |
| begin the restore process. |
|
|
732668 | Reboot the phone. After entering #, hang up to begin rebooting. |
111Set a static IP address. Enter the address (use * to enter the “.” value), then press #.
To save, press 1; to review, press 2; to
NOTE DHCP must be disabled to use this option; if DHCP is not disabled, you receive an error message.
121Set a netmask. Enter the address (use * to enter the “.” value), then press #.
To save, press 1; to review, press 2; to
NOTE DHCP must be disabled to use this option; if DHCP is not disabled, you receive an error message.
131Set a gateway. Enter the address (use * to enter the “.” value), then press #.
To save, press 1; to review, press 2; to
NOTE DHCP must be disabled to use this option; if DHCP is not disabled, you receive an error message.
161Set the address of the primary Domain Name Server (DNS). Enter the address (use * to enter the “.” value), then press #.
To save, press 1; to review, press 2; to
181Set the IP multicast address (used by a Cisco Voice System to communicate with the IP phone). Enter the address (use * to enter the “.” value), then press #.
To save, press 1. To review the value you entered, press 2. To
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide | 62 |