Using Advanced Phone Features | 4 |
| |
Using the Paging Feature |
|
|
|
|
|
Using Speed Dials
Cisco SPA502G, Cisco SPA504G, Cisco SPA508G, Cisco SPA509G,
Cisco SPA512G, Cisco SPA514G:
To call one of your configured speed dial numbers, either:
•Open a phone line and press the number on the phone keypad for the speed dial, then press Dial.
•Press the Setup button, select Speed Dial, choose the number, and press Dial.
Cisco SPA504G, Cisco SPA508G, Cisco SPA509G, Cisco SPA514G, Attendant Console:
Press the unused line button you have configured for a speed dial.
Cisco SPA501G:
Press the number on the phone keypad for the speed dial and wait a few seconds.
Using the Paging Feature
Your IP phone can automatically answer pages from other Cisco IP phones in the Cisco Voice System. When your phone is paged, the phone emits a series of beeps, and
Your phone must be part of a Cisco Voice Network to use this feature.
Paging Another Phone
To page another phone, dial *96 plus the extension of the phone you are paging. If the phone you are paging is not set up to auto answer pages, the call will ring as a normal voice call.
Paging a Group of Phones
Your phone administrator can configure a group of phones that you can page simultaneously. Each paging group has a number associated with it. Your administrator must give you the number of the groups that are configured. To page this group, dial *96 plus the number of the paging group.
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide | 53 |