Microsoft MN-820 manual Test your Internet Connection

Page 30

To configure the TCP/IP properties on a computer running Windows XP operating system

1.Click Start, click Control Panel, and then double-click Network Connections.

2.Double-click the icon for the connection you want to configure, and then, in the Connection Status dialog box, click Properties.

3.On the General tab, under This connection uses the following items, click Internet Protocol (TCP/IP), and then click Properties.

4.Click Obtain IP address automatically, and then click Obtain DNS server address automatically.

5.Click OK to close the TCP/IP Properties dialog box, and then click OK to close the Connection Properties dialog box.

Step 9: Test your Internet Connection

1.Turn on your broadband modem.

2.From the Home page of the Base Station Management Tool, under Wide Area Network (WAN) settings, check the status of the Broadband connection.

3.If the status is Connected, your setup is complete. If the status is Disconnected, click Renew if you have a dynamic or static IP connection, or Connect if you have a PPPoE connection. If the status is still Disconnected, confirm your Internet settings with your ISP, and then try to configure the base station again.

24Microsoft Broadband Networking Wireless Notebook Kit User’s Guide

Image 30

Contents Page Avertissement Contents Using an Internet Connection over a Network Contents Page About Your Wireless Notebook Kit Your Wireless Base StationUPnP Standards and Your Wireless Base Station Base Station Ports, Status Lights, and the Restore ButtonIntroduction To attach the stand Using the Base Station StandResetting the Base Station To detach the standYour Wireless Notebook Adapter Restoring Factory Default SettingsTo restore the base station to factory default settings Windows XP or Windows Adapter Status LightsCardBus Technology Windows 98, Windows 98 SE, and Windows MeAbout Wireless Radio Connections Types of Wireless NetworksPlacement of Wireless Components Adjusting the Base Station Antenna Understanding Wireless Transmission StandardsAbout Wired Ethernet Connections Ethernet CablesSetup Typical SetupGather Components, Tools, and Information If… Do this first…Run the Setup Wizard to Set Up the Base Station Connect the Base StationConfigure the Base Station Insert the Adapter into Your Computer Configure Your Adapter Test Your NetworkWhat’s Next? Setting Up the Base Station Wirelessly To set up the base station wirelesslyPage Custom setup Base Station Setup Establish the Base Station PasswordOpen the Base Station Management Tool Establish Your Internet Settings Establish Your Wireless Settings Establish Your Wireless Security SettingsCustomize Network Settings Configure Your ComputerTest your Internet Connection Access Point Setup Connect the Base Station to a ComputerEstablish the Base Station Password Set the Base Station to Access Point Mode Page Network activities Using an Internet Connection over a Network Logging on to Your NetworkTo log off and log back on to your network To refresh the Network Devices list Using the Broadband Network UtilityTo start the Broadband Network Utility To remove an inactive device from the Network Devices listTo share a folder or drive on your computer in Windows XP Using Files and Folders over a NetworkMake your files and folders available to the network To share a folder or drive on your computer in WindowsAccess shared files To access shared files on other computersUsing a Printer over a Network Using Other Peripheral Devices over a Network About Reading E-Mail Messages on a NetworkPlaying Games on Your Network and on the Internet To set up an ad hoc network in Windows XP Creating a Computer-to-Computer Ad Hoc NetworkJoining an Available Wireless Network To join an available network in Windows XPPage View Network Devices Monitoring Your NetworkView Status To refresh the network device listTo upgrade software, drivers, or firmware View Adapter SettingsTo view adapter settings Updating Software, Drivers, and FirmwareHelp Protect Your Network from Computer Viruses Help Protect Your Network from HackersHelp Protect Your Network from Unauthorized Access Troubleshooting Setup and Hardware ProblemsIf your base station is connected wirelessly Setup does not recognize my wireless base stationSetup does not recognize my wireless notebook adapter If your base station is connected with an Ethernet cableTroubleshooting To clone a MAC address Troubleshooting Network and Internet Problems Can’t stay connected to my wireless networkTo disable 802.1x authentication in Windows XP Troubleshooting Page Troubleshooting My network is slow Troubleshooting Page Printing and File Sharing Issues Can’t print to a networked printerPage Troubleshooting If the file is stored on a Windows XP-based computer Click OK to save the changesInternet Connection Type To determine which connection type your ISP providesTo locate your Internet settings General Internet SettingsDynamic IP Dhcp Settings Host NameStatic IP Settings To locate your static IP address settings Windows XPTo locate your static IP address settings Windows PPPoE Settings Workgroup NameTo determine your workgroup name in Windows XP or Windows Wireless Network Name Wireless Security SettingsTo determine your workgroup name in Windows Me and Windows Getting Help Technical Support OptionsRegulatory Information United States Radio and TV Interference RegulationsCanadian Radiocommunication Regulations Technical Specifications Base StationTo +40 deg C To +35 deg C System Requirements END-USER License Agreement for Microsoft Software General Provisions Limited Warranty Contrat DE Licence Utilisateur Final Pour Logiciel Microsoft Dispositions Générales Garantie Limitée Page Glossary Page Glossary Page Glossary Page Index Page Index Typical Setup base station, 11 preparing for My Network Settings