Microsoft MN-820 manual Static IP Settings, To locate your static IP address settings Windows XP

Page 67

You can find the MAC address for your Microsoft adapters printed on the label. You can find the base station MAC address on the side of the base station (or on the underside if the base station is positioned vertically).

Note For information about cloning a MAC address, so that the setting conforms to the MAC address on record with your ISP, see Help in the Broadband Network Utility.

Static IP Settings

When you set up the base station to use a static IP address, you will need the IP address, subnet mask, and default gateway. You might also need primary and secondary Domain Name Server (DNS) settings.

Use any of the following methods to determine these settings:

OSee the documentation provided by your Internet service provider or contact your ISP.

OUse one of the following procedures, depending on your version of the Windows operating system.

Note For information about configuring a static IP address on an adapter, see Help in the Broadband Network Utility.

To locate your static IP address settings (Windows XP)

1.Do one of the following:

O Click Start, click Control Panel, click Network and Internet Connections, and then double-click Network Connections.

O Click Start, click Control Panel, and then double-click Network Connections.

2.In the Network Connections window, right-click your Internet connection, and then click Properties.

3.Select Internet Protocol (TCP/IP), and then click Properties.

4.Under Use the following IP Address, note the settings for IP address, subnet mask, and default gateway name.

5.Note whether your connection obtains a DNS server address automatically, or whether it uses a specific address or addresses.

To locate your static IP address settings (Windows 2000)

1.Click Start, point to Settings, click Control Panel, and then double-click Network and Dial-Up Connections.

2.In the Network and Dial-Up Connections window, right-click your Internet connection, and then click Properties.

3.On the General tab, select Internet Protocol (TCP/IP), and then click Properties.

4.On the General tab, under Use the following IP address, note the IP addresses.

5.Click Advanced to see the gateway information.

6.On the DNS Configuration tab, note the DNS addresses.

Appendixes 61

Page 66 Page 68
Image 67
Page 66 Page 68
Contents Page Avertissement Contents Using an Internet Connection over a Network Contents Page Your Wireless Base Station About Your Wireless Notebook KitBase Station Ports, Status Lights, and the Restore Button UPnP Standards and Your Wireless Base StationIntroduction To detach the stand Using the Base Station StandResetting the Base Station To attach the standRestoring Factory Default Settings Your Wireless Notebook AdapterTo restore the base station to factory default settings Windows 98, Windows 98 SE, and Windows Me Adapter Status LightsCardBus Technology Windows XP or WindowsTypes of Wireless Networks About Wireless Radio ConnectionsPlacement of Wireless Components Understanding Wireless Transmission Standards Adjusting the Base Station AntennaEthernet Cables About Wired Ethernet ConnectionsTypical Setup SetupIf… Do this first… Gather Components, Tools, and InformationConnect the Base Station Run the Setup Wizard to Set Up the Base StationConfigure the Base Station Insert the Adapter into Your Computer Test Your Network Configure Your AdapterWhat’s Next? To set up the base station wirelessly Setting Up the Base Station WirelesslyPage Custom setup Establish the Base Station Password Base Station SetupOpen the Base Station Management Tool Establish Your Internet Settings Establish Your Wireless Security Settings Establish Your Wireless SettingsConfigure Your Computer Customize Network SettingsTest your Internet Connection Connect the Base Station to a Computer Access Point SetupEstablish the Base Station Password Set the Base Station to Access Point Mode Page Network activities Logging on to Your Network Using an Internet Connection over a NetworkTo log off and log back on to your network To remove an inactive device from the Network Devices list Using the Broadband Network UtilityTo start the Broadband Network Utility To refresh the Network Devices listTo share a folder or drive on your computer in Windows Using Files and Folders over a NetworkMake your files and folders available to the network To share a folder or drive on your computer in Windows XPTo access shared files on other computers Access shared filesUsing a Printer over a Network About Reading E-Mail Messages on a Network Using Other Peripheral Devices over a NetworkPlaying Games on Your Network and on the Internet Creating a Computer-to-Computer Ad Hoc Network To set up an ad hoc network in Windows XPTo join an available network in Windows XP Joining an Available Wireless NetworkPage To refresh the network device list Monitoring Your NetworkView Status View Network DevicesUpdating Software, Drivers, and Firmware View Adapter SettingsTo view adapter settings To upgrade software, drivers, or firmwareHelp Protect Your Network from Hackers Help Protect Your Network from Computer VirusesHelp Protect Your Network from Unauthorized Access Setup and Hardware Problems TroubleshootingIf your base station is connected with an Ethernet cable Setup does not recognize my wireless base stationSetup does not recognize my wireless notebook adapter If your base station is connected wirelesslyTroubleshooting To clone a MAC address Troubleshooting Can’t stay connected to my wireless network Network and Internet ProblemsTo disable 802.1x authentication in Windows XP Troubleshooting Page Troubleshooting My network is slow Troubleshooting Page Can’t print to a networked printer Printing and File Sharing IssuesPage Troubleshooting Click OK to save the changes If the file is stored on a Windows XP-based computerTo determine which connection type your ISP provides Internet Connection TypeHost Name General Internet SettingsDynamic IP Dhcp Settings To locate your Internet settingsTo locate your static IP address settings Windows XP Static IP SettingsTo locate your static IP address settings Windows Workgroup Name PPPoE SettingsTo determine your workgroup name in Windows XP or Windows Wireless Security Settings Wireless Network NameTo determine your workgroup name in Windows Me and Windows Technical Support Options Getting HelpUnited States Radio and TV Interference Regulations Regulatory InformationCanadian Radiocommunication Regulations Base Station Technical SpecificationsTo +40 deg C To +35 deg C System Requirements END-USER License Agreement for Microsoft Software General Provisions Limited Warranty Contrat DE Licence Utilisateur Final Pour Logiciel Microsoft Dispositions Générales Garantie Limitée Page Glossary Page Glossary Page Glossary Page Index Page Index Typical Setup base station, 11 preparing for My Network Settings
Top Page Image Contents