To set a password (up to 7 digits, not including 0):
1.Press the Messaging command key.
2.Press the New Password command key.
3.Enter a password.
4.Press the Enter command key.
5.Enter the password again.
6.Press the Enter command key.
7.Press SETTINGS to exit the Settings menu.
To change or clear your password:
1.Press the Messaging command key.
2.Press the New Password command key.
3.Enter your current password.
4.Press the Enter command key.
5.Press the New Password command key.
6.Enter your current password.
7.Press the Enter command key.
8.Do one of the following:
To change your password, enter a new password and press the Enter command key.
To clear your password, press 0.
9.Press SETTINGS to exit the Settings menu.