$SSOLFDWLRQ6RIWZDUH,QVWDOODWLRQ
During installation you will be required to set the following parameters:
You may choose to install either the Program files, the Data files or both, Pro- gram and Data files.
1HZ,QVWDOODWLRQ
If you are perform a new installation program and data files have to be installed on the system.
8SJUDGLQJIURP&&69[
If you perform an upgrade from a version between CCS V1.0 and 1.6 to CCS V2.4 you need to install the program and the data files due to considerable changes in the database structure.
After the installation you have the option to migrate the all the customer’s data from CCS V1.x into the new database. Please refer to the section “Upgrade Data- base from CCS V1.x to CCS V2.x” on page 24.
8SJUDGLQJIURP&&69[
If you perform an upgrade from a version between CCS V2.0 and 2.3 to CCS V2.4 you need to install the program files only. The database with the customer’s daata will be migrated automatically.
Select the path where the Database configuration file IDAPI.CFG shall be in- stalled (directory where you have installed the Database)
You can select the serial Comm Port to be used.
Select the Type of PBX System the CCS will be connected.
Click Next.
You can select the directories where the installation shall take place. You are however recommended to leave the default setting unchanged, as this will sim- plify Post Installation, Maintenance and future upgrades.
Default value:
C:\CCS
As soon as the required parameters have been entered installation will start to copy the Application files to the designated directories.
Click Next. The Setup will start copying the files.
EN/LZT BS 102 063/S R2B
| BusinessPhone Call Centre Supervisor - Standard |
23 | Installation Guide |