Siemens 1200 Making Calls Basic Functions, Answering Calls, Answering a Call With the Handset

Making Calls – Basic Functions

Step by Step

n

uor v

Making Calls – Basic Functions

Answering Calls

Special default ring signaling is set for your telephone:

•When you receive an internal call or callback, your telephone rings once every four seconds (single- tone sequence).

•When you receive an external call, your telephone rings twice in rapid succession every four seconds (dual-tone sequence).

•When you receive a call from the entrance telepho- ne, your telephone rings three times in rapid suc- cession every four seconds (triple-tone sequence).

•If a call is waiting, you hear a short tone (beep) every six seconds.

•When you receive a timed reminder, your telephone rings twice (double-tone sequence, i.e. long ring fol- lowed by short ring).

The number and/or name of the caller appears on the display unless suppressed by the caller.

If a name is saved in your HiPath 1200 for the caller’s station number, it is displayed (if configured by the ser- vice personnel).

The service personnel can also program the system to display the multi-station number (MSN) dialed in the case of external calls or the name assigned to the MSN.

Answering a Call With the Handset

The telephone rings. The caller is displayed.

Lift the handset.

To raise or lower the volume, keep pressing the keys un- til the desired call volume is set.

15