Casio DT-X5 Series manual AC Power Supply

Page 11

AC Power Supply

Warning

•Do not use the Handheld Terminal at a voltage other than the specified voltage. Also, do not connect the Handheld Terminal to a multi-plug power strip. Doing so creates the danger of fire and electric shock.

•Avoid conditions that can cause damage or breaks in the power cord. Do not place heavy objects on the power cord and keep it away from sources of heat. Any of these conditions can damage the power cord, creating the danger of fire and electric shock.

•Never modify, sharply bend, twist, or pull on the power cord. Doing so creates the danger of fire and electric shock.

•When using the battery charger, Cradle and Dual Battery Charger, be sure to

use the respective AC adaptors. Use of other types of AC adaptors creates the danger of fire and electric shock.

•Should the power cord become severely damaged (to the point that wires are exposed or broken), contact your original vendor or an authorized CASIO service provider about repair or replacement. Use of a damaged electrical cord creates the danger of fire and electric shock.

Caution

•Keep the power cord away from stoves and other sources of extreme heat. Heat can melt the covering of the power cord and create the danger of fire and electric shock.

•Never pull on the power cord when unplugging it. Doing so can damage the cord and create the danger of fire and electric shock. (Always hold the plug when unplugging it from the wall outlet.)

•Never touch the plug while your hands are wet. Doing so can create the danger of electric shock.

• Be sure to unplug the power cord from the wall outlet before moving the battery charger, Cradle and Dual Battery Charger. Failure to do so can result in damage to the power cord caused by pulling it, which creates the danger of fire and electric shock.

•Be sure to unplug the power cord from the wall outlet before cleaning the battery charger and Cradle.

•Be sure to turn the power off and unplug the power cord after use.

•Unplug the power cord from the wall outlet whenever leaving the battery charger, Cradle and Dual Battery Charger unattended for a long period of time.

E-9

DT-X5_E_P01_10.p65

9

04.7.14, 6:01 PM

Image 11

Contents DT-X5 Series DT-X5EP00.p65 04.7.14, 601 PM Disassembly and Modification Safety PrecautionsMarkings and Symbols Precautions During UseLaser Light Foreign ObjectsDropping and Damage MoistureLCD Screen LocationHeavy Objects Operation of Wireless Data Communication Function Alkaline Battery Handling Precautions Safety Precautions Optional Lithium-ion Battery Pack Safety Precautions AC Power Supply AC Adaptor Backup Copies of All Important DataOperating Precautions Warranty and After Service FCC Warning We, the undersigned 0560 Contents Resetting the Handheld Terminal Before Getting Started When unpacking, make sure that all items are includedInstall the AA size alkaline batteries Install the main batteryWhen Using the Battery Pack Turning On the Power Cradle-type Battery Charger Handheld Terminal System ConfigurationWall Mount Unit Battery PackDual Battery Charger Cables General Guide F1 Deletes one character to the left Always keep backup copies of all important data Replacing the BatteryReplacing the Battery Pack Replacing the Battery To replace the battery pack Replacing the Battery DT-X5EP2735.p65 04.7.14, 603 PM Removal Procedure Installation Procedure Attaching the Wrist Strap Turning Backlight On and Off Adjusting Display ContrastUsing the Laser Scanner DT-X5M10E/DT-X5M10R only Never look directly into the laser light Bar Code Scanning PositionBar code and stacked 2D code Reading Guide DT-X5M30U DT-X5M30UR DT-X5M30E DT-X5M30R Adjusting Laser Emission Width DT-X5M10/DT-X5M10R only Emission Width Adjustment Bar code IR Communication Performing CommunicationBluetoothTM Communication To perform a reset Resetting the Handheld TerminalReset and Full Reset Memory Initialization If reset finds a memory problem To perform a full resetHandheld Terminal DT-X5 SpecificationsPower Drop durability Dust and water resistance Complies with IP54 General Guide Port requires installation of a special driver on the PC Next, plug the AC adaptor into a power outlet Connecting the AC Adaptor and Connecting to ComputerDT-X5EP4958.p65 04.7.14, 605 PM Removing the Fall Protector Configuring DIP Switch Settings HA-A61IO 2mm 1/8 Using Wall Mount UnitHook the upper wall mount unit hole onto the upper screw Use the modular cable for the connections Connecting Multiple Bridge Satellite Cradles HA-A61IOUSB Using the Cradle-type Battery Charger Remove the desktop unit in the case of a wall-mount Connecting the AC Adaptor for Cradle-type Battery Charger Cradle-type Battery Charger HA-A30CHG Specifications Using the Dual Battery Charger Other Charge Indicator Lamp Charging a Battery PackConnecting Multiple Dual Battery Chargers Model Charging Dual Battery Charger DT-5022CHG SpecificationsLarge-capacity Battery Pack Specifications Using Rechargeable Battery PackBattery Pack Specifications Memo DT-X5EP5970.p65 04.8.5, 350 PM DT-X5EHyo14.p65 04.7.14, 600 PM