Casio DT-X5 Series manual Replacing the Battery Pack

Page 29

Replacing the Battery

Your Handheld Terminal uses two types of battery: main battery and a memory backup battery.

AAsize alkaline batteries (DT-X5M10E/DT-X5M30E/DT-X5M30U) or the battery pack is used for the main battery. There are two types of battery packs that can be used, consisting of the battery pack (HA-A20BAT) and the large-capacity battery pack (DT- 5025LBAT).

The backup battery is installed inside of the Handheld Terminal.

This guide uses the following terms to refer to the batteries.

Main battery:

Alkaline batteries or battery pack for operation.

Backup battery:

Memory backup battery contained within the Handheld Terminal.

Battery pack:

Generic name for the battery pack (HA-A20BAT) and large-capacity

 

battery pack (DT-5025LBAT) used for the main battery.

If the main battery becomes worn down, either replace with new AA size alkaline batteries, promptly charge the battery pack or replace with a charged battery pack. You can use the Dual Battery Charger, the Cradle-type Battery Charger, or the Bridge Satellite Cradle/Bridge Basic Cradle to charge a battery pack. See the sections of this guide that cover the Dual Battery Charger, the Cradle-type Battery Charger, and the Bridge Satellite Cradle/Bridge Basic Cradle for information about how to use them for charging.

Replacing the Battery Pack

Important!

Always keep backup copies of all important data!

The main battery powers normal operation and also provides power required to maintain memory contents, while the backup battery provides backup power to maintain memory contents. Because of this, you should not remove the main battery while the backup battery is dead. Removing the battery pack while the backup battery is dead causes data in the memory to be corrupted or lost. Note that once data is lost it cannot be recovered. Always keep separate backup copies of all important data.

The charge of a battery pack when you purchase it may be depleted due to testing at the factory or natural discharge during shipment and storage. Be sure to charge the battery pack before you use it.

The life of a battery pack is limited, and charging a battery pack causes it to gradually lose its ability to maintain the charge. If your battery pack seems to require charging very frequently, it probably means it is time to purchase a new one.

The backup battery achieves a full charge in about four days when the battery pack is loaded.

A fully charged backup battery can maintain memory (RAM) contents for about three days, even when the main battery is removed.

When using batteries for the main battery, always make sure to use AA size alkaline batteries.

E-27

DT-X5_E_P27_35.p65

27

04.7.14, 6:03 PM

Image 29
Contents DT-X5 Series DT-X5EP00.p65 04.7.14, 601 PM Markings and Symbols Safety PrecautionsPrecautions During Use Disassembly and ModificationDropping and Damage Foreign ObjectsMoisture Laser LightLCD Screen LocationHeavy Objects Operation of Wireless Data Communication Function Alkaline Battery Handling Precautions Safety Precautions Optional Lithium-ion Battery Pack Safety Precautions AC Power Supply AC Adaptor Backup Copies of All Important DataOperating Precautions Warranty and After Service FCC Warning We, the undersigned 0560 Contents Resetting the Handheld Terminal Before Getting Started When unpacking, make sure that all items are includedInstall the AA size alkaline batteries Install the main batteryWhen Using the Battery Pack Turning On the Power Cradle-type Battery Charger Handheld Terminal System ConfigurationWall Mount Unit Battery PackDual Battery Charger Cables General Guide F1 Deletes one character to the left Always keep backup copies of all important data Replacing the BatteryReplacing the Battery Pack Replacing the Battery To replace the battery pack Replacing the Battery DT-X5EP2735.p65 04.7.14, 603 PM Removal Procedure Installation Procedure Attaching the Wrist Strap Turning Backlight On and Off Adjusting Display ContrastUsing the Laser Scanner DT-X5M10E/DT-X5M10R only Never look directly into the laser light Bar Code Scanning PositionBar code and stacked 2D code Reading Guide DT-X5M30U DT-X5M30UR DT-X5M30E DT-X5M30R Adjusting Laser Emission Width DT-X5M10/DT-X5M10R only Emission Width Adjustment Bar code IR Communication Performing CommunicationBluetoothTM Communication To perform a reset Resetting the Handheld TerminalReset and Full Reset Memory Initialization If reset finds a memory problem To perform a full resetHandheld Terminal DT-X5 SpecificationsPower Drop durability Dust and water resistance Complies with IP54 General Guide Port requires installation of a special driver on the PC Next, plug the AC adaptor into a power outlet Connecting the AC Adaptor and Connecting to ComputerDT-X5EP4958.p65 04.7.14, 605 PM Removing the Fall Protector Configuring DIP Switch Settings HA-A61IO 2mm 1/8 Using Wall Mount UnitHook the upper wall mount unit hole onto the upper screw Use the modular cable for the connections Connecting Multiple Bridge Satellite Cradles HA-A61IOUSB Using the Cradle-type Battery Charger Remove the desktop unit in the case of a wall-mount Connecting the AC Adaptor for Cradle-type Battery Charger Cradle-type Battery Charger HA-A30CHG Specifications Using the Dual Battery Charger Other Charge Indicator Lamp Charging a Battery PackConnecting Multiple Dual Battery Chargers Model Charging Dual Battery Charger DT-5022CHG SpecificationsLarge-capacity Battery Pack Specifications Using Rechargeable Battery PackBattery Pack Specifications Memo DT-X5EP5970.p65 04.8.5, 350 PM DT-X5EHyo14.p65 04.7.14, 600 PM