Casio DT-X5 Series manual DT-X5EP4958.p65 04.7.14, 605 PM

Page 54

Using the Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO)

5.Making sure that their two IR ports come into contact with each other, place the Handheld Terminal onto the Bridge Satellite Cradle. This causes the Bridge Satellite Cradle power indicator lamp to light in green.

If the system is operating normally and the communication is enabled, the system status indicator lamp lights in green.

The communication indicator lamp flashes in green when the communication starts.

When charging is initiated, Indicator 1 on the Handheld Terminal lights up in red. When charging has been completed, Indicator 1 on the Handheld Terminal changes color from red to green.

Important!

A high-sensitivity communication element is used during IR communication.

In order to ensure successful communication, avoid using cellular phones or other devices that emit radio wave in the area where you are performing IR communication.

If you need to use such a device, move away from the communicating Handheld Terminals. In case of a cellular phone, keep it at least 30cm (1178") away.

Take care to avoid allowing the Bridge Satellite Cradle/Bridge Basic Cradle power contacts to become connected to each other, which creates a short.

Shorting the power contacts can damage the Bridge Satellite Cradle/Bridge Basic Cradle.

E-52

DT-X5_E_P49_58.p65

52

04.7.14, 6:05 PM

Image 54
Contents DT-X5 Series DT-X5EP00.p65 04.7.14, 601 PM Precautions During Use Safety PrecautionsMarkings and Symbols Disassembly and ModificationMoisture Foreign ObjectsDropping and Damage Laser LightLocation Heavy ObjectsLCD Screen Operation of Wireless Data Communication Function Alkaline Battery Handling Precautions Safety Precautions Optional Lithium-ion Battery Pack Safety Precautions AC Power Supply Backup Copies of All Important Data AC AdaptorOperating Precautions Warranty and After Service FCC Warning We, the undersigned 0560 Contents Resetting the Handheld Terminal When unpacking, make sure that all items are included Before Getting StartedInstall the main battery Install the AA size alkaline batteriesWhen Using the Battery Pack Turning On the Power Handheld Terminal System Configuration Cradle-type Battery ChargerBattery Pack Dual Battery ChargerWall Mount Unit Cables General Guide F1 Deletes one character to the left Replacing the Battery Replacing the Battery PackAlways keep backup copies of all important data Replacing the Battery To replace the battery pack Replacing the Battery DT-X5EP2735.p65 04.7.14, 603 PM Removal Procedure Installation Procedure Attaching the Wrist Strap Adjusting Display Contrast Turning Backlight On and OffUsing the Laser Scanner DT-X5M10E/DT-X5M10R only Bar Code Scanning Position Never look directly into the laser lightBar code and stacked 2D code Reading Guide DT-X5M30U DT-X5M30UR DT-X5M30E DT-X5M30R Adjusting Laser Emission Width DT-X5M10/DT-X5M10R only Emission Width Adjustment Bar code Performing Communication IR CommunicationBluetoothTM Communication Resetting the Handheld Terminal Reset and Full Reset Memory InitializationTo perform a reset To perform a full reset If reset finds a memory problemDT-X5 Specifications Handheld TerminalPower Drop durability Dust and water resistance Complies with IP54 General Guide Port requires installation of a special driver on the PC Connecting the AC Adaptor and Connecting to Computer Next, plug the AC adaptor into a power outletDT-X5EP4958.p65 04.7.14, 605 PM Removing the Fall Protector Configuring DIP Switch Settings HA-A61IO Using Wall Mount Unit 2mm 1/8Hook the upper wall mount unit hole onto the upper screw Connecting Multiple Bridge Satellite Cradles HA-A61IO Use the modular cable for the connectionsUSB Using the Cradle-type Battery Charger Remove the desktop unit in the case of a wall-mount Connecting the AC Adaptor for Cradle-type Battery Charger Cradle-type Battery Charger HA-A30CHG Specifications Using the Dual Battery Charger Other Charging a Battery Pack Charge Indicator LampConnecting Multiple Dual Battery Chargers Dual Battery Charger DT-5022CHG Specifications Model ChargingUsing Rechargeable Battery Pack Battery Pack SpecificationsLarge-capacity Battery Pack Specifications Memo DT-X5EP5970.p65 04.8.5, 350 PM DT-X5EHyo14.p65 04.7.14, 600 PM