Casio DT-X5 Series manual Remove the desktop unit in the case of a wall-mount

Using the Cradle-type Battery Charger

1	AC Adaptor Jack	Connect the AC adaptor (sold separately) here.
2	Wall Mount Unit	The holes in this plate accept screws that secure the wall mount
	Fastening Plate	unit in place.
3	Terminal Detect	This switch detects when the Handled Terminal is not seated
	Switch	correctly on the Cradle.
4	Power Contacts	Power is supplied to the Handheld Terminal via these contacts.
5	Power Indicator	This lamp indicates the power status and the mounting status of
	Lamp	the Handheld Terminal.
		Off: Power off
		Red: Power on, Handheld Terminal not mounted
		Green: Power on, Handheld Terminal mounted correctly
6	Power Switch	Turns the power on and off.
7	Desktop Unit	This is the base when using the Cradle in a desktop configuration.
		Remove the desktop unit in the case of a wall-mount
		configuration.
8	Fall Protector	This is a removable attachment that prevents the Handheld
		Terminal from tipping over and falling.
9	Car Mounted	This is used when attaching the separately sold Battery Charger
	Battery Charger	Car Mount Unit (HA-A34AT).
	Attachment Holes

E-60

DT-X5_E_P59_69.p65 60 04.7.14, 6:05 PM