Casio DT-X5 Series manual Optional Lithium-ion Battery Pack

Page 9

Optional Lithium-ion Battery Pack

Danger

Never allow the battery pack to become wet. Water can create the danger of battery pack heat emission, explosion, and fire.

Never use or leave the battery pack next to open flame, near a stove, or any other area exposed to high heat. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Never use the battery pack with any device other than the Handheld Terminal. Doing so can create the danger of battery pack heat emission, explosion, and fire.

Note that the battery pack’s positive (+) and negative (–) polarities must be oriented correctly when it is loaded into battery charger or the Handheld Terminal. Connecting the battery pack with its polarities reversed creates the danger of battery pack fluid leakage, heat emission, explosion, and fire.

Never dispose of the battery pack by incinerating it or otherwise expose it to heat. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Never allow the positive (+) and negative (–) terminals of the battery pack to become connected (shorted) by metal. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Never transport or store the battery pack together with a necklace, hair pins or other metal objects. Doing so can short battery pack terminals, creating the danger of battery pack heat emission, explosion, and fire. Be sure to place the battery pack in its case whenever transporting or storing it.

Never throw the battery pack or otherwise subject it to strong impact. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Never pierce the battery pack with nails, hit it with a hammer, or step on it. Doing so can create the danger of battery pack heat emission, explosion, and fire.

Never try to take apart the battery pack or modify it in any way. Doing so creates the danger of battery pack heat emission, explosion, and fire.

Use only the specified battery charger to charge the battery pack. Use of

other type of battery charger creates the danger of battery pack heat emission, explosion, and fire.

E-7

DT-X5_E_P01_10.p65

7

04.7.14, 6:01 PM

Image 9
Contents DT-X5 Series DT-X5EP00.p65 04.7.14, 601 PM Markings and Symbols Safety PrecautionsPrecautions During Use Disassembly and ModificationDropping and Damage Foreign ObjectsMoisture Laser LightLocation Heavy ObjectsLCD Screen Operation of Wireless Data Communication Function Alkaline Battery Handling Precautions Safety Precautions Optional Lithium-ion Battery Pack Safety Precautions AC Power Supply AC Adaptor Backup Copies of All Important DataOperating Precautions Warranty and After Service FCC Warning We, the undersigned 0560 Contents Resetting the Handheld Terminal Before Getting Started When unpacking, make sure that all items are includedInstall the AA size alkaline batteries Install the main batteryWhen Using the Battery Pack Turning On the Power Cradle-type Battery Charger Handheld Terminal System ConfigurationBattery Pack Dual Battery ChargerWall Mount Unit Cables General Guide F1 Deletes one character to the left Replacing the Battery Replacing the Battery PackAlways keep backup copies of all important data Replacing the Battery To replace the battery pack Replacing the Battery DT-X5EP2735.p65 04.7.14, 603 PM Removal Procedure Installation Procedure Attaching the Wrist Strap Turning Backlight On and Off Adjusting Display ContrastUsing the Laser Scanner DT-X5M10E/DT-X5M10R only Never look directly into the laser light Bar Code Scanning PositionBar code and stacked 2D code Reading Guide DT-X5M30U DT-X5M30UR DT-X5M30E DT-X5M30R Adjusting Laser Emission Width DT-X5M10/DT-X5M10R only Emission Width Adjustment Bar code IR Communication Performing CommunicationBluetoothTM Communication Resetting the Handheld Terminal Reset and Full Reset Memory InitializationTo perform a reset If reset finds a memory problem To perform a full resetHandheld Terminal DT-X5 SpecificationsPower Drop durability Dust and water resistance Complies with IP54 General Guide Port requires installation of a special driver on the PC Next, plug the AC adaptor into a power outlet Connecting the AC Adaptor and Connecting to ComputerDT-X5EP4958.p65 04.7.14, 605 PM Removing the Fall Protector Configuring DIP Switch Settings HA-A61IO 2mm 1/8 Using Wall Mount UnitHook the upper wall mount unit hole onto the upper screw Use the modular cable for the connections Connecting Multiple Bridge Satellite Cradles HA-A61IOUSB Using the Cradle-type Battery Charger Remove the desktop unit in the case of a wall-mount Connecting the AC Adaptor for Cradle-type Battery Charger Cradle-type Battery Charger HA-A30CHG Specifications Using the Dual Battery Charger Other Charge Indicator Lamp Charging a Battery PackConnecting Multiple Dual Battery Chargers Model Charging Dual Battery Charger DT-5022CHG SpecificationsUsing Rechargeable Battery Pack Battery Pack SpecificationsLarge-capacity Battery Pack Specifications Memo DT-X5EP5970.p65 04.8.5, 350 PM DT-X5EHyo14.p65 04.7.14, 600 PM