Casio DT-X5 Series manual Install the main battery, Install the AA size alkaline batteries

Page 21

Install the main battery

When Using the AA size Alkaline Batteries (DT-X5M10E/DT-X5M30E/ DT-X5M30U only)

1. Install the AA size alkaline batteries.

1Slide the two main battery cover lock switches on both sides of the Handheld Terminal to the “FREE” position, and remove the main battery cover.

2Install the AA size alkaline batteries. Make sure the batteries are aligned properly.

3Return the main battery cover to its original position as shown in the illustration, and return the two main battery pack cover lock switches to the “LOCK” position.

 

2

 

1

1

 

 

2

1

1

 

2

 

1

2

3

3

 

E-19

DT-X5_E_P18_24.p65

19

04.7.27, 3:29 PM

Image 21
Contents DT-X5 Series DT-X5EP00.p65 04.7.14, 601 PM Markings and Symbols Safety PrecautionsPrecautions During Use Disassembly and ModificationDropping and Damage Foreign ObjectsMoisture Laser LightLocation Heavy ObjectsLCD Screen Operation of Wireless Data Communication Function Alkaline Battery Handling Precautions Safety Precautions Optional Lithium-ion Battery Pack Safety Precautions AC Power Supply AC Adaptor Backup Copies of All Important DataOperating Precautions Warranty and After Service FCC Warning We, the undersigned 0560 Contents Resetting the Handheld Terminal Before Getting Started When unpacking, make sure that all items are includedInstall the AA size alkaline batteries Install the main batteryWhen Using the Battery Pack Turning On the Power Cradle-type Battery Charger Handheld Terminal System ConfigurationBattery Pack Dual Battery ChargerWall Mount Unit Cables General Guide F1 Deletes one character to the left Replacing the Battery Replacing the Battery PackAlways keep backup copies of all important data Replacing the Battery To replace the battery pack Replacing the Battery DT-X5EP2735.p65 04.7.14, 603 PM Removal Procedure Installation Procedure Attaching the Wrist Strap Turning Backlight On and Off Adjusting Display ContrastUsing the Laser Scanner DT-X5M10E/DT-X5M10R only Never look directly into the laser light Bar Code Scanning PositionBar code and stacked 2D code Reading Guide DT-X5M30U DT-X5M30UR DT-X5M30E DT-X5M30R Adjusting Laser Emission Width DT-X5M10/DT-X5M10R only Emission Width Adjustment Bar code IR Communication Performing CommunicationBluetoothTM Communication Resetting the Handheld Terminal Reset and Full Reset Memory InitializationTo perform a reset If reset finds a memory problem To perform a full resetHandheld Terminal DT-X5 SpecificationsPower Drop durability Dust and water resistance Complies with IP54 General Guide Port requires installation of a special driver on the PC Next, plug the AC adaptor into a power outlet Connecting the AC Adaptor and Connecting to ComputerDT-X5EP4958.p65 04.7.14, 605 PM Removing the Fall Protector Configuring DIP Switch Settings HA-A61IO 2mm 1/8 Using Wall Mount UnitHook the upper wall mount unit hole onto the upper screw Use the modular cable for the connections Connecting Multiple Bridge Satellite Cradles HA-A61IOUSB Using the Cradle-type Battery Charger Remove the desktop unit in the case of a wall-mount Connecting the AC Adaptor for Cradle-type Battery Charger Cradle-type Battery Charger HA-A30CHG Specifications Using the Dual Battery Charger Other Charge Indicator Lamp Charging a Battery PackConnecting Multiple Dual Battery Chargers Model Charging Dual Battery Charger DT-5022CHG SpecificationsUsing Rechargeable Battery Pack Battery Pack SpecificationsLarge-capacity Battery Pack Specifications Memo DT-X5EP5970.p65 04.8.5, 350 PM DT-X5EHyo14.p65 04.7.14, 600 PM