Casio DT-X5 Series manual Removal Procedure

Page 34

Removing and Installing the Alkaline Battery Holder (DT-X5M10E/DT-X5M30E/DT-X5M30U only)

Removal Procedure

When using a battery pack, first remove the alkaline battery holder according to the following procedure.

1.Make sure the Handheld Terminal is turned off. If the power is on, press the power key to turn it off.

2.Turn over the Handheld Terminal.

3.Slide the two main battery cover lock switches on both sides of the Handheld Terminal to the “FREE” position, and remove the main battery cover.

If the AA size alkaline batteries are installed, remove the batteries by referring to step 4 on page 28 describing “Replacing the AA size Alkaline Batteries”.

4.Remove the alkaline battery holder by

holding the portion indicated by the circle (™) in the illustration while pushing the tab on the outer frame of the alkaline battery holder to the inside.

2

1

1

2

1

E-32

DT-X5_E_P27_35.p65

32

04.7.14, 6:03 PM

Image 34

Contents DT-X5 Series DT-X5EP00.p65 04.7.14, 601 PM Precautions During Use Safety PrecautionsMarkings and Symbols Disassembly and ModificationMoisture Foreign ObjectsDropping and Damage Laser LightHeavy Objects LocationLCD Screen Operation of Wireless Data Communication Function Alkaline Battery Handling Precautions Safety Precautions Optional Lithium-ion Battery Pack Safety Precautions AC Power Supply Backup Copies of All Important Data AC AdaptorOperating Precautions Warranty and After Service FCC Warning We, the undersigned 0560 Contents Resetting the Handheld Terminal When unpacking, make sure that all items are included Before Getting StartedInstall the main battery Install the AA size alkaline batteriesWhen Using the Battery Pack Turning On the Power Handheld Terminal System Configuration Cradle-type Battery ChargerDual Battery Charger Battery PackWall Mount Unit Cables General Guide F1 Deletes one character to the left Replacing the Battery Pack Replacing the BatteryAlways keep backup copies of all important data Replacing the Battery To replace the battery pack Replacing the Battery DT-X5EP2735.p65 04.7.14, 603 PM Removal Procedure Installation Procedure Attaching the Wrist Strap Adjusting Display Contrast Turning Backlight On and OffUsing the Laser Scanner DT-X5M10E/DT-X5M10R only Bar Code Scanning Position Never look directly into the laser lightBar code and stacked 2D code Reading Guide DT-X5M30U DT-X5M30UR DT-X5M30E DT-X5M30R Adjusting Laser Emission Width DT-X5M10/DT-X5M10R only Emission Width Adjustment Bar code Performing Communication IR CommunicationBluetoothTM Communication Reset and Full Reset Memory Initialization Resetting the Handheld TerminalTo perform a reset To perform a full reset If reset finds a memory problemDT-X5 Specifications Handheld TerminalPower Drop durability Dust and water resistance Complies with IP54 General Guide Port requires installation of a special driver on the PC Connecting the AC Adaptor and Connecting to Computer Next, plug the AC adaptor into a power outletDT-X5EP4958.p65 04.7.14, 605 PM Removing the Fall Protector Configuring DIP Switch Settings HA-A61IO Using Wall Mount Unit 2mm 1/8Hook the upper wall mount unit hole onto the upper screw Connecting Multiple Bridge Satellite Cradles HA-A61IO Use the modular cable for the connectionsUSB Using the Cradle-type Battery Charger Remove the desktop unit in the case of a wall-mount Connecting the AC Adaptor for Cradle-type Battery Charger Cradle-type Battery Charger HA-A30CHG Specifications Using the Dual Battery Charger Other Charging a Battery Pack Charge Indicator LampConnecting Multiple Dual Battery Chargers Dual Battery Charger DT-5022CHG Specifications Model ChargingBattery Pack Specifications Using Rechargeable Battery PackLarge-capacity Battery Pack Specifications Memo DT-X5EP5970.p65 04.8.5, 350 PM DT-X5EHyo14.p65 04.7.14, 600 PM