Casio DT-X5 Series manual Installation Procedure

Page 35

Installation Procedure

When using AA size alkaline batteries, install the alkaline battery holder according to the following procedure.

1.Make sure the Handheld Terminal is turned off. If the power is on, press the power key to turn it off.

2.Turn over the Handheld Terminal.

3.Slide the two main battery cover lock switches on both sides of the Handheld Terminal to the “FREE” position, and remove the main battery cover.

If the battery pack is installed, remove the battery pack by referring to step 4 describing “To replace the battery pack” on page 30.

4.Install the alkaline battery holder as shown in the illustration.

Fold the battery pack removal tape so that it is beneath the alkaline battery holder.

2

1

1

1

2

E-33

DT-X5_E_P27_35.p65

33

04.7.14, 6:03 PM

Image 35

Contents DT-X5 Series DT-X5EP00.p65 04.7.14, 601 PM Disassembly and Modification Safety PrecautionsMarkings and Symbols Precautions During UseLaser Light Foreign ObjectsDropping and Damage MoistureLCD Screen LocationHeavy Objects Operation of Wireless Data Communication Function Alkaline Battery Handling Precautions Safety Precautions Optional Lithium-ion Battery Pack Safety Precautions AC Power Supply AC Adaptor Backup Copies of All Important DataOperating Precautions Warranty and After Service FCC Warning We, the undersigned 0560 Contents Resetting the Handheld Terminal Before Getting Started When unpacking, make sure that all items are includedInstall the AA size alkaline batteries Install the main batteryWhen Using the Battery Pack Turning On the Power Cradle-type Battery Charger Handheld Terminal System ConfigurationWall Mount Unit Battery PackDual Battery Charger Cables General Guide F1 Deletes one character to the left Always keep backup copies of all important data Replacing the BatteryReplacing the Battery Pack Replacing the Battery To replace the battery pack Replacing the Battery DT-X5EP2735.p65 04.7.14, 603 PM Removal Procedure Installation Procedure Attaching the Wrist Strap Turning Backlight On and Off Adjusting Display ContrastUsing the Laser Scanner DT-X5M10E/DT-X5M10R only Never look directly into the laser light Bar Code Scanning PositionBar code and stacked 2D code Reading Guide DT-X5M30U DT-X5M30UR DT-X5M30E DT-X5M30R Adjusting Laser Emission Width DT-X5M10/DT-X5M10R only Emission Width Adjustment Bar code IR Communication Performing CommunicationBluetoothTM Communication To perform a reset Resetting the Handheld TerminalReset and Full Reset Memory Initialization If reset finds a memory problem To perform a full resetHandheld Terminal DT-X5 SpecificationsPower Drop durability Dust and water resistance Complies with IP54 General Guide Port requires installation of a special driver on the PC Next, plug the AC adaptor into a power outlet Connecting the AC Adaptor and Connecting to ComputerDT-X5EP4958.p65 04.7.14, 605 PM Removing the Fall Protector Configuring DIP Switch Settings HA-A61IO 2mm 1/8 Using Wall Mount UnitHook the upper wall mount unit hole onto the upper screw Use the modular cable for the connections Connecting Multiple Bridge Satellite Cradles HA-A61IOUSB Using the Cradle-type Battery Charger Remove the desktop unit in the case of a wall-mount Connecting the AC Adaptor for Cradle-type Battery Charger Cradle-type Battery Charger HA-A30CHG Specifications Using the Dual Battery Charger Other Charge Indicator Lamp Charging a Battery PackConnecting Multiple Dual Battery Chargers Model Charging Dual Battery Charger DT-5022CHG SpecificationsLarge-capacity Battery Pack Specifications Using Rechargeable Battery PackBattery Pack Specifications Memo DT-X5EP5970.p65 04.8.5, 350 PM DT-X5EHyo14.p65 04.7.14, 600 PM