Casio DT-X5 Series manual Configuring DIP Switch Settings HA-A61IO

Page 56

Using the Bridge Satellite Cradle (HA-A61IO)/Bridge Basic Cradle (HA-A60IO)

Configuring DIP Switch Settings (HA-A61IO)

Dismounting the bottom cover of the Bridge Satellite Cradle exposes the DIP switches. You can change the ON/OFF settings of the DIP switches to set the configuration. Please set after first switching OFF the power.

1 2 3 4 5 6 7 8

Not used (Always off)

Not used (Always off)

Host Computer Interface

Setting

RS-232C

USB

6

OFF

ON

*

Daisy Chain

Setting	5
Intermediate Unit	OFF
Daisy Chain Disabled/Termination	ON

*

Connection Type

Setting	3	4	*
Host Computer	OFF	OFF	*
Daisy Chain	ON	OFF

Bridge Satellite Cradle Data Rate

Setting	1	2	*
115,200bps	ON	OFF	*
*Initial factory default setting

Important!

Note that other DIP settings are used for testing and inspection purposes. Because of this, you should never use any DIP settings other than those described above.

E-54

DT-X5_E_P49_58.p65

54

04.7.14, 6:05 PM

Image 56

Contents DT-X5 Series DT-X5EP00.p65 04.7.14, 601 PM Safety Precautions Markings and SymbolsPrecautions During Use Disassembly and ModificationForeign Objects Dropping and DamageMoisture Laser LightLCD Screen LocationHeavy Objects Operation of Wireless Data Communication Function Alkaline Battery Handling Precautions Safety Precautions Optional Lithium-ion Battery Pack Safety Precautions AC Power Supply Backup Copies of All Important Data AC AdaptorOperating Precautions Warranty and After Service FCC Warning We, the undersigned 0560 Contents Resetting the Handheld Terminal When unpacking, make sure that all items are included Before Getting StartedInstall the main battery Install the AA size alkaline batteriesWhen Using the Battery Pack Turning On the Power Handheld Terminal System Configuration Cradle-type Battery ChargerWall Mount Unit Battery PackDual Battery Charger Cables General Guide F1 Deletes one character to the left Always keep backup copies of all important data Replacing the BatteryReplacing the Battery Pack Replacing the Battery To replace the battery pack Replacing the Battery DT-X5EP2735.p65 04.7.14, 603 PM Removal Procedure Installation Procedure Attaching the Wrist Strap Adjusting Display Contrast Turning Backlight On and OffUsing the Laser Scanner DT-X5M10E/DT-X5M10R only Bar Code Scanning Position Never look directly into the laser lightBar code and stacked 2D code Reading Guide DT-X5M30U DT-X5M30UR DT-X5M30E DT-X5M30R Adjusting Laser Emission Width DT-X5M10/DT-X5M10R only Emission Width Adjustment Bar code Performing Communication IR CommunicationBluetoothTM Communication To perform a reset Resetting the Handheld TerminalReset and Full Reset Memory Initialization To perform a full reset If reset finds a memory problemDT-X5 Specifications Handheld TerminalPower Drop durability Dust and water resistance Complies with IP54 General Guide Port requires installation of a special driver on the PC Connecting the AC Adaptor and Connecting to Computer Next, plug the AC adaptor into a power outletDT-X5EP4958.p65 04.7.14, 605 PM Removing the Fall Protector Configuring DIP Switch Settings HA-A61IO Using Wall Mount Unit 2mm 1/8Hook the upper wall mount unit hole onto the upper screw Connecting Multiple Bridge Satellite Cradles HA-A61IO Use the modular cable for the connectionsUSB Using the Cradle-type Battery Charger Remove the desktop unit in the case of a wall-mount Connecting the AC Adaptor for Cradle-type Battery Charger Cradle-type Battery Charger HA-A30CHG Specifications Using the Dual Battery Charger Other Charging a Battery Pack Charge Indicator LampConnecting Multiple Dual Battery Chargers Dual Battery Charger DT-5022CHG Specifications Model ChargingLarge-capacity Battery Pack Specifications Using Rechargeable Battery PackBattery Pack Specifications Memo DT-X5EP5970.p65 04.8.5, 350 PM DT-X5EHyo14.p65 04.7.14, 600 PM