Casio DT-X5 Series manual Adjusting Display Contrast, Turning Backlight On and Off

Page 37

Configuring Handheld Terminal Settings

Adjusting Display Contrast

Perform the following steps to adjust display contrast to make display more vivid and easier to see.

•Press the “Fn” key and then press the “2” key or “3” key after confirming that “F” is displayed in the lower right corner of the screen. Pressing the “2” key adjusts for more contrast, while pressing the “3” key adjusts for less contrast.

*In order to continue to make adjustments, press the “2” key or “3” key after again first pressing the “Fn” key.

*This can also be set by pressing the “2” key (Settings) on the system menu, and then pressing the “2” key (Contrast and Brightness).

Turning Backlight On and Off

When operating the Handheld Terminal in a dark location, you can turn on the backlight to facilitate viewing of the screen.

•You can switch the backlight on and off by pressing “1” after pressing the Fn key.

E-35

DT-X5_E_P27_35.p65

35

04.7.14, 6:03 PM

Image 37

Contents DT-X5 Series DT-X5EP00.p65 04.7.14, 601 PM Markings and Symbols Safety PrecautionsPrecautions During Use Disassembly and ModificationDropping and Damage Foreign ObjectsMoisture Laser LightHeavy Objects LocationLCD Screen Operation of Wireless Data Communication Function Alkaline Battery Handling Precautions Safety Precautions Optional Lithium-ion Battery Pack Safety Precautions AC Power Supply AC Adaptor Backup Copies of All Important DataOperating Precautions Warranty and After Service FCC Warning We, the undersigned 0560 Contents Resetting the Handheld Terminal Before Getting Started When unpacking, make sure that all items are includedInstall the AA size alkaline batteries Install the main batteryWhen Using the Battery Pack Turning On the Power Cradle-type Battery Charger Handheld Terminal System ConfigurationDual Battery Charger Battery PackWall Mount Unit Cables General Guide F1 Deletes one character to the left Replacing the Battery Pack Replacing the BatteryAlways keep backup copies of all important data Replacing the Battery To replace the battery pack Replacing the Battery DT-X5EP2735.p65 04.7.14, 603 PM Removal Procedure Installation Procedure Attaching the Wrist Strap Turning Backlight On and Off Adjusting Display ContrastUsing the Laser Scanner DT-X5M10E/DT-X5M10R only Never look directly into the laser light Bar Code Scanning PositionBar code and stacked 2D code Reading Guide DT-X5M30U DT-X5M30UR DT-X5M30E DT-X5M30R Adjusting Laser Emission Width DT-X5M10/DT-X5M10R only Emission Width Adjustment Bar code IR Communication Performing CommunicationBluetoothTM Communication Reset and Full Reset Memory Initialization Resetting the Handheld TerminalTo perform a reset If reset finds a memory problem To perform a full resetHandheld Terminal DT-X5 SpecificationsPower Drop durability Dust and water resistance Complies with IP54 General Guide Port requires installation of a special driver on the PC Next, plug the AC adaptor into a power outlet Connecting the AC Adaptor and Connecting to ComputerDT-X5EP4958.p65 04.7.14, 605 PM Removing the Fall Protector Configuring DIP Switch Settings HA-A61IO 2mm 1/8 Using Wall Mount UnitHook the upper wall mount unit hole onto the upper screw Use the modular cable for the connections Connecting Multiple Bridge Satellite Cradles HA-A61IOUSB Using the Cradle-type Battery Charger Remove the desktop unit in the case of a wall-mount Connecting the AC Adaptor for Cradle-type Battery Charger Cradle-type Battery Charger HA-A30CHG Specifications Using the Dual Battery Charger Other Charge Indicator Lamp Charging a Battery PackConnecting Multiple Dual Battery Chargers Model Charging Dual Battery Charger DT-5022CHG SpecificationsBattery Pack Specifications Using Rechargeable Battery PackLarge-capacity Battery Pack Specifications Memo DT-X5EP5970.p65 04.8.5, 350 PM DT-X5EHyo14.p65 04.7.14, 600 PM