BT 3505 manual Time saver

Page 51

5675 BT Synergy 3505 UG [4] 11/11/03 4:15 PM Page 51

BT Synergy 3505 – Edition 4 – 11.11.03 – 5675

Remote access	51

3. Press 7 within eight seconds. You will hear “Answer on”.

If you have any new messages, they will be played after you have entered your security code.

Check for messages

1.Dial your phone number. When you hear your outgoing message, press .

You will hear “Please enter your security code”.

2.Enter your 3-digit code. If you have new messages, you will hear “You have (n) new messages”, and they are played.

Or you will hear “You have no new messages, to hear main menu, press 1.”

If you enter your security code incorrectly, after the second attempt, your BT Synergy 3505 will announce: “Thank you for calling” and will hang up.

When you first dial in you will be prompted for the security code. If the code is not entered within 10 seconds you will be prompted again, if no code is entered within 10 seconds then your BT Synergy 3505 will hang up.

Time saver

If you have set the answer delay to Time Saver, your answering machine will answer after 2 rings if you have new messages. If you do not have new messages it will not answer until 6 rings. This enables you to hang up before you are connected, saving you the cost of a call.

Image 51

Contents User Guide Welcome… Addition This guide Additional handsets and bases Using the answering machine Remote accessConnecting to a fax machine This guideThis guide Help Replacing handset batteries HelplineGeneral information Handset range Getting startedShould give about 14 hours talk time or 350 hours Between 0 and C until the day and time are setTelephone wall socket Talk/Standby timeGetting started Feature Setting Default settings for your BT Synergy Answering MachineIf you have purchased a BT Synergy 3505 Multiple pack Your BT Synergy 3505 is now ready for useAttaching the belt clip optional Handset buttons Getting to know your phoneBase/answering machine buttons Switches the audible message alert on and off,HS1 Display icons This is where the icons will appearNavigating the menus To select volume To confirmMenu map Call timer Using the phoneUp and speak EXT symbol flashesReceiving calls PressHandset. It also enables other people in the room to HandsfreeListen to your conversation over the loudspeaker Number will be shown first RedialSecrecy Phonebook see page 21. The most recentPhonebook PagingAgain Using the phone Keypad beeps Handset settingsAccidentally dialled while carrying the handset around External/Internal ringer melodyKeypad lock Lock the keypad to prevent numbers from beingPress and hold Keypad to enter a new name and pressLanguage You can change the language used on the handsetSuomi Base settings Select a base Your BT Synergy 3505 is now reset to its default settings Default settingsHandset default settings are Handset & base ringer volume Internal and External handsetPause after picking up line Caller Display Caller Display and Call WaitingCaller Display and Call Waiting Caller Display and Call Waiting Call WaitingIf, during a call, you hear the call waiting beep Accept a Call Waiting callUsing the answering machine Blank Message display on the baseOutgoing messages Switch on/offLoudspeaker volume Using the answering machinePress For the outgoing message menu Pre-recorded message is Hello, your call cannot beRecord your own Answer Only message Your outgoing message will be played Via the handset Check the outgoing message Via the baseOutgoing message At the basePress and hold to return to standby Answer delay Check answer delay setting At the baseAnnounced with each press Using the answering machine via the base Default setting is OffAudible message alert If you want to take the call Call screeningOutgoing message, and screen incoming calls HandsetSelect Answer Only Press 7 . The prompt announces Please speak after When your answering machine takes a call, you can Call screening when handset is off baseRemote access Time saver Operating your answering machine from another phone Additional handsets & bases Additional handsets & bases Enter For the base you want to register toUntil the handset locates the base Internal calls Transferring callsPress Int and enter the handset number you want to call For Handset priorityWay conversation Call toScroll to select the option you want, either Base or Connecting to a fax machine Seconds To change the answer delay setting, seeHelp Or hearing aid Switched on Buzzing noise on myCharging properly Switched on Radio, TV, computerBT Synergy 3005 charger Item Code Problems Possible causeFitted Cannot adjust an BT Synergy 3505 base Item Code0870 605 General information Safety informationGeneral information Guarantee BT Synergy 3505 UG 4 11/11/03 421 PM Only use approved AAA NiMH rechargeable batteries Technical informationDeclaration of Conformance Connecting to a switchboardGeneral information Date of purchase Place of purchase Serial number Ofﬁces worldwide