BT 3505 manual Getting started, Handset range

Page 7

5675 BT Synergy 3505 UG [4] 11/11/03 4:02 PM Page 7

BT Synergy 3505 – Edition 4 – 11.11.03 – 5675

		Getting started		7
		Getting started		7

Location

You need to place your BT Synergy 3505 within 2 metres of a mains power and telephone socket so that the cables will reach.

Make sure it is at least 1 metre away from other electrical appliances to avoid interference.

Your BT Synergy 3505 works by sending radio signals between the handset and base. The strength of the signal depends on where you site the base. Putting it as high as possible ensures the best signal.

Setting up

1.Plug the mains power cable into the base. Use the power supply with the clear plastic end.

The green Power/In use light comes on and the base announces the default answering machine settings (see page 10). The message counter comes on and alternates

WARNING

Do not place your BT Synergy 3505 in the bathroom or other humid areas.

Handset range

The BT Synergy 3505 has a range of 300 metres outdoors when there is a clear line of sight between the base and handset. When there is no clear line of sight between the base and handset, e.g. base indoors and handset either indoors or outdoors, the range could be reduced to 50 metres. Thick stone walls can severely affect the range.

Signal strength

The symbol on your handset display indicates when you are in range. When you are out of range, it flashes and BASE 1 is displayed.

The base station must be plugged into the mains at all times.

IMPORTANT

Do not connect the telephone line until at least one of the handsets is fully charged.

The base station must be plugged into the mains power at all times.

You must charge your handset for 16 hours before you can use it.

Which socket?

Power socket

Telephone line socket

Image 7

Contents User Guide Welcome… Addition This guide Additional handsets and bases Using the answering machine Remote accessConnecting to a fax machine This guideReplacing handset batteries Helpline This guide HelpGeneral information Handset range Getting startedShould give about 14 hours talk time or 350 hours Between 0 and C until the day and time are setTelephone wall socket Talk/Standby timeGetting started Feature Setting Default settings for your BT Synergy Answering MachineYour BT Synergy 3505 is now ready for use If you have purchased a BT Synergy 3505 Multiple packAttaching the belt clip optional Handset buttons Getting to know your phoneBase/answering machine buttons Switches the audible message alert on and off,HS1 Display icons This is where the icons will appearNavigating the menus To select volume To confirmMenu map Call timer Using the phoneUp and speak EXT symbol flashesReceiving calls PressHandsfree Handset. It also enables other people in the room toListen to your conversation over the loudspeaker Number will be shown first RedialSecrecy Phonebook see page 21. The most recentPhonebook PagingAgain Using the phone Keypad beeps Handset settingsAccidentally dialled while carrying the handset around External/Internal ringer melodyKeypad lock Lock the keypad to prevent numbers from beingPress and hold Keypad to enter a new name and pressYou can change the language used on the handset LanguageSuomi Base settings Select a base Your BT Synergy 3505 is now reset to its default settings Default settingsHandset & base ringer volume Internal and External handset Handset default settings arePause after picking up line Caller Display Caller Display and Call WaitingCaller Display and Call Waiting Caller Display and Call Waiting Call WaitingIf, during a call, you hear the call waiting beep Accept a Call Waiting callUsing the answering machine Blank Message display on the baseOutgoing messages Switch on/offLoudspeaker volume Using the answering machinePress For the outgoing message menu Pre-recorded message is Hello, your call cannot beRecord your own Answer Only message Your outgoing message will be played Via the handset Check the outgoing message Via the baseOutgoing message At the baseCheck answer delay setting At the base Press and hold to return to standby Answer delayAnnounced with each press Default setting is Off Using the answering machine via the baseAudible message alert If you want to take the call Call screeningOutgoing message, and screen incoming calls HandsetSelect Answer Only Press 7 . The prompt announces Please speak after When your answering machine takes a call, you can Call screening when handset is off baseRemote access Time saver Operating your answering machine from another phone Additional handsets & bases Enter For the base you want to register to Additional handsets & basesUntil the handset locates the base Transferring calls Internal callsPress Int and enter the handset number you want to call For Handset priorityWay conversation Call toScroll to select the option you want, either Base or Connecting to a fax machine Seconds To change the answer delay setting, seeHelp Or hearing aid Switched on Buzzing noise on myCharging properly Switched on Radio, TV, computerBT Synergy 3005 charger Item Code Problems Possible causeFitted Cannot adjust an BT Synergy 3505 base Item Code0870 605 General information Safety informationGeneral information Guarantee BT Synergy 3505 UG 4 11/11/03 421 PM Only use approved AAA NiMH rechargeable batteries Technical informationDeclaration of Conformance Connecting to a switchboardGeneral information Date of purchase Place of purchase Serial number Ofﬁces worldwide