BT 3505 manual Switched on Buzzing noise on my, Radio, TV, computer, Or hearing aid

Page 61

5675 BT Synergy 3505 UG [4] 11/11/03 4:21 PM Page 61

BT Synergy 3505 – Edition 4 – 11.11.03 – 5675

					Help	61


Problems	Possible cause

You cannot link up	Is				flashing in the display? You may be out of
You cannot link up	Is				flashing in the display? You may be out of
with the base station	range, move closer to the base.
	Check that the base is connected to the mains power
	and switched on.
	Are the batteries low or flat? If so, charge the batteries
	or replace them if necessary.
	If using more than one base, check that you are
	connected to the correct base. See page 29.

No ring on the handset	Check that the ringer volume is switched on, see page 24.
	Check that the base is plugged into the phone socket
	and that it is also connected to the mains power and
	switched on.

Buzzing noise on my	Sometimes, your BT Synergy 3505 and other DECT GAP
radio, TV, computer	compatible handsets can interfere with other electrical
or hearing aid	equipment if placed too close. Try moving at least one
	metre away from such appliances.

The handset is not	Check that the base is plugged into the mains socket
charging properly	and switched on.

Image 61

Contents User Guide Welcome… Addition This guide Connecting to a fax machine Using the answering machine Remote accessThis guide Additional handsets and basesReplacing handset batteries Helpline This guide HelpGeneral information Handset range Getting startedTelephone wall socket Between 0 and C until the day and time are setTalk/Standby time Should give about 14 hours talk time or 350 hoursGetting started Feature Setting Default settings for your BT Synergy Answering MachineYour BT Synergy 3505 is now ready for use If you have purchased a BT Synergy 3505 Multiple packAttaching the belt clip optional Handset buttons Getting to know your phoneBase/answering machine buttons Switches the audible message alert on and off,HS1 Display icons This is where the icons will appearNavigating the menus To select volume To confirmMenu map Call timer Using the phoneReceiving calls EXT symbol flashesPress Up and speakHandsfree Handset. It also enables other people in the room toListen to your conversation over the loudspeaker Secrecy RedialPhonebook see page 21. The most recent Number will be shown firstPhonebook PagingAgain Using the phone Keypad beeps Handset settingsKeypad lock External/Internal ringer melodyLock the keypad to prevent numbers from being Accidentally dialled while carrying the handset aroundPress and hold Keypad to enter a new name and pressYou can change the language used on the handset LanguageSuomi Base settings Select a base Your BT Synergy 3505 is now reset to its default settings Default settingsHandset & base ringer volume Internal and External handset Handset default settings arePause after picking up line Caller Display Caller Display and Call WaitingCaller Display and Call Waiting Caller Display and Call Waiting Call WaitingIf, during a call, you hear the call waiting beep Accept a Call Waiting callUsing the answering machine Blank Message display on the baseLoudspeaker volume Switch on/offUsing the answering machine Outgoing messagesPress For the outgoing message menu Pre-recorded message is Hello, your call cannot beRecord your own Answer Only message Your outgoing message will be played Via the handset Check the outgoing message Via the baseOutgoing message At the baseCheck answer delay setting At the base Press and hold to return to standby Answer delayAnnounced with each press Default setting is Off Using the answering machine via the baseAudible message alert If you want to take the call Call screeningOutgoing message, and screen incoming calls HandsetSelect Answer Only Press 7 . The prompt announces Please speak after When your answering machine takes a call, you can Call screening when handset is off baseRemote access Time saver Operating your answering machine from another phone Additional handsets & bases Enter For the base you want to register to Additional handsets & basesUntil the handset locates the base Transferring calls Internal callsPress Int and enter the handset number you want to call Way conversation Handset priorityCall to ForScroll to select the option you want, either Base or Connecting to a fax machine Seconds To change the answer delay setting, seeHelp Charging properly Switched on Switched on Buzzing noise on myRadio, TV, computer Or hearing aidFitted Cannot adjust an Problems Possible causeBT Synergy 3505 base Item Code BT Synergy 3005 charger Item Code0870 605 General information Safety informationGeneral information Guarantee BT Synergy 3505 UG 4 11/11/03 421 PM Only use approved AAA NiMH rechargeable batteries Technical informationDeclaration of Conformance Connecting to a switchboardGeneral information Date of purchase Place of purchase Serial number Ofﬁces worldwide