BT SYNERGY 4500 manual Product disposal instructions

Page 94

Synergy 4500 – Issue 5 – Edition 1 – 18.01.07 – 7993

94 General information

It is recommended that you place your product at least one metre away from such appliances to minimise any risk of interference.

•Never dispose of batteries in a fire. There is a serious risk of explosion and/or the release of highly toxic chemicals.

Cleaning

•Clean the handset and base (or charger) with a damp (not wet) cloth, or an anti-static wipe. Never use household polish as this will damage the product. Never use a dry cloth as this may cause a static shock.

Environmental

•Do not expose to direct sunlight.

•The handset may become warm when the batteries are being charged or during prolonged periods of use. This is normal. However, we recommend that to avoid damage you do not place the product on antique/veneered wood.

•Do not stand your product on carpets or other surfaces which generate fibres, or place it in locations preventing the free flow of air over its surfaces.

•Do not submerge any part of your product in water and do not use it in damp or humid conditions, such as bathrooms.

•Do not expose your product to fire, explosive or other hazardous conditions.

•There is a slight chance your phone could be damaged by an electrical storm. We recommend

that you unplug the power and telephone line cord during an electrical storm.

Product disposal instructions

• The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life.

•The Waste of Electrical and Electronic Equipment (WEEE) Directive (2002/96/EC) has been put in place to recycle products using best available recovery and recycling techniques to minimise the impact on the environment, treat any hazardous substances and avoid the increasing landfill.

Product disposal instructions for residential users

•When you have no further use for it, please remove any batteries and dispose of them and the product as per your local authority’s recycling processes. For more information please contact your local authority or the retailer where the product was purchased.

Product disposal instructions for business users

•Business users should contact their suppliers and check the terms and conditions of the purchase contract and ensure that this product is not mixed with other commercial waste for disposal.

If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com

Page 93 Page 95
Image 94
Page 93 Page 95
Contents User Guide Welcome… Got everything? BT Synergy Base mains Handset This guide Caller Display To change the answer delay Call list Default settingsSilence the alarm To set audible messageCall Waiting Cleaning Adding or changing Service EnvironmentalGuarantee Select a baseSetting up Getting startedAfter 24 hours, plug one end of the telephone line cord Talk/Standby timeGetting started Set the time Your BT Synergy 4500 is ready for useGetting to know your phone Handset buttonsBT Synergy Base buttons and LEDs PlayNavigating the menus Press MenuMenu map Phonebook menuUsing the phone Call timerReceive a call When you receive a call, the phone rings and the CallsLight on the handset flashes. Symbol Flashes in the display to let you know if it is an externalSecrecy HandsfreeRedial Switch to handsfree during a callRedial the last number called If you decide not to delete, select Save option Keypad lock Press then press . The display shows the symbolPaging Press To stop the paging ring Name and number phonebookPress On the base. The paged handsets rings Press any button on the handsetRinger melody options are displayed. Use Menu or When you hear the melody you want, press Save toSelect OK option to confirm Confirm. Display shows Entry SavedDisplayed Melody you want, press Save to confirm. Display showsCopy an entry to another handset Using the phone Display then shows Copying From Handset X. Each With the ‘SIM copy’ feature you can copy entries fromPhonebook? select OK to confirm Entry will then be copied in turnSIM card PIN code will be displayed if your SIM card is Select Option Access codeUse Menu Or Menu to select Access code and press OK On and Off are displayed as options. Either, select On toHandset settings Handset ringer volumeHandset settings Handset settings Handset settings Handset settings Base settings Base settings Base settings OFF Date and time settings Answering machine Setting up the answering machine If you hear, Answer on, your answer and record outgoingBase loudspeaker volume Answer delayLevel is Press To increase the volume or To decrease Volume With the answering machine on and in standby mode Setting will be announced to confirm e.g. Calls will beAudible message alert Outgoing messages To check the audible message alert settingTo set audible message alert via the base Minutes long and will replace the pre-recorded Incoming messages when using Answer and RecordRecord your own outgoing message MessageSelect the outgoing message answer mode To select Answer and Record, press and release or toVia the handset Using the answering machine via the base During playback Message playback Using the answering machine via the handsetSelect the New option. Your new messages will be played Record a memo OK optionTo screen a call via the base Call screeningAutomatically Remote access Time saver Answering machine Calls list BT Calling FeaturesCaller Display View and dial from the Calls listUse Menu or Menu to scroll through the list Ringer melody options are displayed, use Menu orSelect the Del option. Delete Entry? is displayed Call Waiting CallersVoice Mail/Message Waiting Text messaging Two text phones connected to the same phone lineSend a text message Select OKTo display Save and select OK Delete to delete a message Sent messages are stored in the OutboxEntering text Your BT Synergy 4500 can store up to 50* messagesCharacter or digit to the left of the cursor Twice, 3 twiceThree times, 5 three times Are entered to the left of the cursorPress Menu or until Inbox is displayed. Select OK option Receiving and reading text messagesOK option. Enter your sub-address PIN code and press OK Then select the OK option For each message, you will seeText messaging If you have set up personal user areas, press Menu or Menu Read, edit, send or delete texts stored in the OutboxService Centre numbers Send to is displayed, select OKConfirm Press and hold to exit and return to standby Text messaging Message alert beeps User AreasText messaging How callers send a text to a user area Displayed and select OKEdit a user area Press Menu or Menu Select OK Delete a user area Press Menu or Menu Select OK Enter a new code for the box and select OK Send option settings Sent Message OFF and select OKUsing additional handsets BT Synergy default base PIN is 0000, see Press Int, Internal Call to Handset is displayed User can press to answer the call Press to end the callPress and hold R . Your external caller will be put on Transferring callsHold and will hear a tone. Transfer To Handset is displayed Using additional handsets Help Help Help Possible problems with text messaging Help Help Synergy 4500 Issue 3 Edition 1 21.08.06 General information Replacing the handset batteriesProduct disposal instructions Guarantee TTE Connecting to a switchboard Synergy 4500 Issue 5 Edition 1 18.01.07 Synergy 4500 Issue 5 Edition 1 18.01.07 Offices worldwide
Top Page Image Contents