Clarity C4205 manual

5.Install desk/wall mount bracket to telephone base.

To Replace Battery Backup Batteries

1.Disconnect telephone line cord and remove desk/wall mount bracket from telephone base.

2.Disconnect battery back-up connector from the telephone base.

3.Remove batteries from desk/wall mount bracket.

4.Install four (4) AA Alkaline batteries with negative (-) end of battery touching

the spring.

5.Connect battery back-up connector to terminal on bottom of telephone base

6.Install desk/wall mount bracket to telephone base

After installing the four (4) AA Alkaline batteries please refer to the chart below:

Power Supply	Power LED Status
AC adapter and	Steady Green
good batteries
AC adapter and	Steady Red
no batteries
Power failure and	Slow flashing red
good batteries
Power failure and	Fast flashing red
bad batteries

20