Walker W-400 user manual Ringer Controls Headset Ringer, Base Ringer, Receiver Volume Control

Page 6

Installation

RINGER CONTROLS

HEADSET RINGER

Set switch (back of base) to ON or OFF . Ringer switch must be ON for handset to ring during incoming calls.

BASE RINGER

The base ringer comes with a volume, pitch and warble control, allowing it to be tailored to each user.

The Volume Control has three settings: OFF, LOW, and HIGH. It is suggested that you set the volume control to high when you first start using your W-400. To do this, slide the ringer volume control toward the wide end of the wedge.

The ringer also has a Pitch Control that has three set- tings: LOW, MED, and HIGH. The low frequency is typi- cally the easiest for people with partial hearing loss to hear. It is suggested that you set the pitch control to low (toward the narrow end of the wedge) when you start using the phone.

The Warble Rate, or speed of ring can also be varied from Fast/Slow.

NOTE: The handset will not ring if the handset ringer switch is set to off. When the hanset is placed on the base unit, only the base the base ringer will ring, regardless of which setting the handset ringer is set to. The W-400 ringers will only function independently when the handset IS NOT placed on the base.

RECEIVER VOLUME CONTROL

1.Refer to-Placing a Call to establish a phone conversation.

2. Press BOOST Button.

3. Adjust the rotary VOLUME CONTR OL to a desired receiving sound level.

4.After hang-up the sound level will go back to normal level.

5.Next time, during a call, you can press BOOST button to get your set sound level.

HANDSET BATTERY CHARGING

The battery pack in the handset must be fully charged 10-14 hours before using the telephone for the first time.

1. Place handset in base. The CHARGE LED on base will light.

2.After batteries are fully charged, check for dial tone by pressing TALK on handset.

3.When the handset battery gets low, there will be 2 beeps every 30 seconds and the TALK BUTTON will flash. Return the handset to the cradle for charging.

To Replace Battery:

1. Remove

2. Install new

3. Close battery cover.

battery cover

battery

Charge 10-14 hours

 

 

before first use.

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents WalkerW-400 Table of Contents Safety Instructions Safety Instructions for Batteries Installation To Replace Battery Receiver Volume ControlHandset Battery Charging Ringer Controls Headset RingerExtended Battery Life Ordering Replacement BatteriesTo recharge battery pack, place handset in base OperationsPlacing a Call Channel OperationSecurity Code Receiving a CallBoost Memory FeatureREDIAL/PAUSE Lighted KEY PADChange a Stored Number TroubleshootingPhone does not Ring When YOU Receive a Call Dialing a Number Stored in MemoryPhone will not Hold Charge Difficulty in Placing or Receiving CallsFCC Rules and Regulations Walker Equipment Limited Warranty Page Page Walker W-400 Por favor lea las Importante InstruccionesTabla de Contenido Instrucciones DE Seguridad Para EL Microteléfono Handset O Unidad Movil DEL Teléfono Instalacion Controls DE Campanero Campanero DEL Microteléfono Control DE Volumen Para LA BocinaAjuste DE Interruptor DE TONO/PULSO, TONE/PULSE Campanero BajoOrdenando Baterías DE Reemplazo OperacionCargando Baterias DEL MICRO- Teléfono Handset Funcionamiento DE 40-CANALESCodigo DE Seguridad Poniendo UNA LlamadaBoton Flash Recibiendo UNA LlamadaTerminando UNA Llamada Tono TemporalOrdenando UN Headset Ó Diadema Telefónica VOCEO/ Localizador DE Microteléfono HandsetHeadset Ó Diadema Telefónica Auxiliar DE Canal DE AccesoSolucionando Problemas LA Unidad no OPERA/NO HAY Tono DE MarcarEL Teléfono no Timbra Cuando Usted Recibe UNA Llamada Regulaciones y reglas de FCC Dificultad Poniendo O Recibiendo Llamadas TelefonicasRegulaciones y reglas de FCC Page Servicio De Garantía Walker Page Page Manuel DE ’UTILISATEUR Téléphone Sans FIL Veuillez lire les Importants ConseilsTable des Matiéres DE Sûreté Safety Instructions Conseils DE Sécurité Pour LES Batteries La base peut être installée sur une plaque murale standard Installation MuraleInstallation de l’unité de base Vue arrière InstallationF muraleVolume DU Récepteur Installation LibreCommandes DE Sonnerie Sonnerie ACTIVÉE/DÉSACTIVÉE AntenneDE Rechange Pour Commander DES BatteriesUtilisation Sélection DE 40 CanauxComment Répondre À UN Appel Comment Faire UN AppelComment Mettre FIN À UN Appel Hors DE Portée Mode Tonalité TemporaireAugmentation DU Volume Recomposition / PausePort Auxiliaire DU Circuit Pour Commander UN Casque D’ÉCOUTECasque D’ÉCOUTE Mise EN MémoireLE Téléphone NE Sonne PAS Lors D’UN Appel Entrant Depannage’APPAREIL NE Fonctionne PAS / Aucune Tonalité LE Téléphone NE SE Charge PASRéglementation Du FCC Garantie limitée de Walker Equipment Qui est protégé? Où? Service de garantie WalkerService sans garantie Compatibilité avec les prothèses auditivesPage Cloud Springs Road Ringgold, GA 30736

W-400 specifications

The Walker W-400 is a highly regarded utility vehicle known for its versatility and robust performance across various applications. This machine has gained popularity among landscaping professionals, golf course maintenance teams, and municipalities due to its efficient operation and ease of use.

One of the main features of the Walker W-400 is its powerful engine. Equipped with a reliable engine, it delivers impressive torque and horsepower, enabling operators to tackle a variety of tasks with efficiency. This power is complemented by its hydrostatic transmission, which provides seamless speed control and smooth operation. The combination of these mechanics allows for precise maneuverability, essential for navigating tight spaces and delicate environments.

The W-400 is designed with an emphasis on productivity. Its high-capacity mowing decks can be swapped out quickly, allowing operators to switch between various attachments such as mulching blades or bagging systems. This feature is particularly useful for landscape professionals who require a multifunctional machine that can adapt to different seasonal demands. Furthermore, the integrated zero-turn steering capability enhances its agility, facilitating effortless navigation around obstacles.

Durability is another key characteristic of the Walker W-400. The use of high-quality materials and construction techniques ensures that this utility vehicle can withstand the rigors of daily use. Heavy-duty components and reinforced structures contribute to its long service life, making it a smart investment for businesses.

In terms of technology, the W-400 features advanced ergonomics that prioritize operator comfort. Its adjustable seat and intuitive control layout allow for extended periods of use without fatigue. Additionally, the integrated safety features, including roll-over protection and easy access to emergency controls, enhance operator confidence during operation.

The Walker W-400 also offers excellent serviceability. Accessible maintenance points and a straightforward design make routine maintenance tasks, such as oil changes and filter replacements, quick and hassle-free. This attention to ease of maintenance helps ensure that the vehicle remains in peak operating condition.

In conclusion, the Walker W-400 stands out for its powerful performance, versatility, and user-friendly design. It is a dependable choice for anyone looking to enhance their landscaping or maintenance capabilities. With its combination of efficiency, durability, and innovative technology, the Walker W-400 is well-suited for a broad range of applications, delivering exceptional results every time.
Top Page Image Contents