Walker W-400 Channel Operation, Security Code, Placing a Call, Receiving a Call, Ending a Call

Page 8

Operations

40-CHANNEL OPERATION

The W-400 cordless telephone automatically searches and selects the clearest of 40 channels when it is being used.

SECURITY CODE

The security code prevents your cordless telephone conversation from being accessed by a phone on a different line. Once the handset battery is fully charged, the handset will automatically select the code from a total of over 65,000 combinations. The code is changed every time the handset is placed in the cradle.

If you experience difficulty with placing or receiving calls, a lost security code may be the cause of the problem. When this occurs, the handset can no longer communicate with the base. Reset by placing handset on base for 5-10 seconds. If that does not work, unplug the AC adapter from the wall outlet. Disconnect the handset battery for 5-10 seconds, then reconnect. Place handset back on base and then reinsert the AC adapter.

PLACING A CALL

1.Press TALK button.

2.TALK BUTTON on handset will light.

3.When you hear a dial tone, place your call.

4.While on a call, if you experience noise or static:

a. Press CHANNEL on handset until a clear channel is found; the call will not be interrupted.

Or

b. Move closer to base.

Note: You must be in usable range to change channels. Base antenna should be in upright position.

RECEIVING A CALL

1.IF THE HANDSET IS OUT OF THE BASE UNIT, press TALK.

2.IF THE HANDSET IS IN THE BASE UNIT, lift the handset.

DO NOT press TALK. You will automatically be connected.

ENDING A CALL

1.Place the handset in the base or press TALK to be disconnected from the line.

FLASH

Use the FLASH button to activate custom calling services such as Call Waiting or Three-Way Calling. (*Contact your local Telephone company for these services.)

TEMPORARY TONE (*)

PULSE (rotary) service users may access touch-tone features needed to operate answering machines or use electronic banking, calling cards, etc., by pressing the TONE (*) button. The phone will automatically return to pulse dialing after the call ends.

OUT OF RANGE

If you experience static while using the telephone, move closer to the base or change the channel by pressing the channel button.

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents WalkerW-400 Table of Contents Safety Instructions Safety Instructions for Batteries Installation Receiver Volume Control Handset Battery ChargingTo Replace Battery Ringer Controls Headset RingerOrdering Replacement Batteries To recharge battery pack, place handset in baseExtended Battery Life OperationsChannel Operation Security CodePlacing a Call Receiving a CallMemory Feature REDIAL/PAUSEBoost Lighted KEY PADTroubleshooting Phone does not Ring When YOU Receive a CallChange a Stored Number Dialing a Number Stored in MemoryPhone will not Hold Charge Difficulty in Placing or Receiving CallsFCC Rules and Regulations Walker Equipment Limited Warranty Page Page Walker W-400 Por favor lea las Importante InstruccionesTabla de Contenido Instrucciones DE Seguridad Para EL Microteléfono Handset O Unidad Movil DEL Teléfono Instalacion Control DE Volumen Para LA Bocina Ajuste DE Interruptor DE TONO/PULSO, TONE/PULSEControls DE Campanero Campanero DEL Microteléfono Campanero BajoOperacion Cargando Baterias DEL MICRO- Teléfono HandsetOrdenando Baterías DE Reemplazo Funcionamiento DE 40-CANALESCodigo DE Seguridad Poniendo UNA LlamadaRecibiendo UNA Llamada Terminando UNA LlamadaBoton Flash Tono TemporalVOCEO/ Localizador DE Microteléfono Handset Headset Ó Diadema TelefónicaOrdenando UN Headset Ó Diadema Telefónica Auxiliar DE Canal DE AccesoEL Teléfono no Timbra Cuando Usted Recibe UNA Llamada Solucionando ProblemasLA Unidad no OPERA/NO HAY Tono DE Marcar Regulaciones y reglas de FCC Dificultad Poniendo O Recibiendo Llamadas TelefonicasRegulaciones y reglas de FCC Page Servicio De Garantía Walker Page Page Manuel DE ’UTILISATEUR Téléphone Sans FIL Veuillez lire les Importants ConseilsTable des Matiéres DE Sûreté Safety Instructions Conseils DE Sécurité Pour LES Batteries Installation Murale Installation de l’unité de baseLa base peut être installée sur une plaque murale standard Vue arrière InstallationF muraleInstallation Libre Commandes DE Sonnerie Sonnerie ACTIVÉE/DÉSACTIVÉEVolume DU Récepteur AntennePour Commander DES Batteries UtilisationDE Rechange Sélection DE 40 CanauxComment Mettre FIN À UN Appel Comment Répondre À UN AppelComment Faire UN Appel Mode Tonalité Temporaire Augmentation DU VolumeHors DE Portée Recomposition / PausePour Commander UN Casque D’ÉCOUTE Casque D’ÉCOUTEPort Auxiliaire DU Circuit Mise EN MémoireDepannage ’APPAREIL NE Fonctionne PAS / Aucune TonalitéLE Téléphone NE Sonne PAS Lors D’UN Appel Entrant LE Téléphone NE SE Charge PASRéglementation Du FCC Garantie limitée de Walker Equipment Service de garantie Walker Service sans garantieQui est protégé? Où? Compatibilité avec les prothèses auditivesPage Cloud Springs Road Ringgold, GA 30736

W-400 specifications

The Walker W-400 is a highly regarded utility vehicle known for its versatility and robust performance across various applications. This machine has gained popularity among landscaping professionals, golf course maintenance teams, and municipalities due to its efficient operation and ease of use.

One of the main features of the Walker W-400 is its powerful engine. Equipped with a reliable engine, it delivers impressive torque and horsepower, enabling operators to tackle a variety of tasks with efficiency. This power is complemented by its hydrostatic transmission, which provides seamless speed control and smooth operation. The combination of these mechanics allows for precise maneuverability, essential for navigating tight spaces and delicate environments.

The W-400 is designed with an emphasis on productivity. Its high-capacity mowing decks can be swapped out quickly, allowing operators to switch between various attachments such as mulching blades or bagging systems. This feature is particularly useful for landscape professionals who require a multifunctional machine that can adapt to different seasonal demands. Furthermore, the integrated zero-turn steering capability enhances its agility, facilitating effortless navigation around obstacles.

Durability is another key characteristic of the Walker W-400. The use of high-quality materials and construction techniques ensures that this utility vehicle can withstand the rigors of daily use. Heavy-duty components and reinforced structures contribute to its long service life, making it a smart investment for businesses.

In terms of technology, the W-400 features advanced ergonomics that prioritize operator comfort. Its adjustable seat and intuitive control layout allow for extended periods of use without fatigue. Additionally, the integrated safety features, including roll-over protection and easy access to emergency controls, enhance operator confidence during operation.

The Walker W-400 also offers excellent serviceability. Accessible maintenance points and a straightforward design make routine maintenance tasks, such as oil changes and filter replacements, quick and hassle-free. This attention to ease of maintenance helps ensure that the vehicle remains in peak operating condition.

In conclusion, the Walker W-400 stands out for its powerful performance, versatility, and user-friendly design. It is a dependable choice for anyone looking to enhance their landscaping or maintenance capabilities. With its combination of efficiency, durability, and innovative technology, the Walker W-400 is well-suited for a broad range of applications, delivering exceptional results every time.
Top Page Image Contents