Telephone settings
Handset layout
1.Earpiece
2.CID (caller ID)
Press to display caller ID information.
3.
/FLASH
Press to make or answer a call. During a 
call, press to receive an incoming call if
call waiting is activated.
4.Dial pad keys
5.
/ SPEAKER (speakerphone)
Press to activate handset speakerphone. Press again to resume normal handset use.
6. REDIAL/PAUSE
Press to view the redial memory. Press and hold to insert a dialing pause when entering numbers.
7.Microphone
8.Handset display
9. 
(Directory) Press to display the directory entries.
10. Vol 
/
(volume)
Press to increase or decrease the listening 
volume during a conversation.
Press to adjust the ringer volume while the handset is not in use.
11.NavKey/MENU/SELECT
Press the center NavKey 
to display menus. Press the up or down NavKey 
or
to navigate through menus. Press the left or right NavKey 
or 
to navigate through menus. Press the center NavKey 
to select a highlighted menu item.
UP CENTER
LEFT 
RIGHT
DOWN
12.OFF/CLEAR
During a call, press to hang up. While using the menus, press to return to the previous menu. While predialing, press to delete digits.
13.#
Press repeatedly to display other dialing options when reviewing the call log (page 23).
14. INT (intercom)
Press to initiate an intercom conversation between handsets. Press to transfer a call.
15.MUTE/REMOVE
While on a call, press to mute the microphone. While reviewing the call log, press to delete an individual entry, or press and hold to clear the entire call log. While entering or editing a name or number, press to delete a character.
Telephone settingsBasic operation
www.vtechphones.com