Telephone operation
Infrared sensor
This feature prevents you from pressing the keys accidentally while you are using the handset during a call.
When you put the earpiece of the handset next to your ear or the infrared sensor is covered during a call, all keys on the dial pad are disabled.
Hold
Earpiece
Infrared sensor
You can place a home or cell call on hold. You will hear an alert tone if you have not taken the call off of hold after 14 minutes. You will hear another alert tone 30 seconds later. At 15 minutes on hold, the call on hold automatically disconnects.
To place a home call on hold:
•Press HOLD on the handset or telephone base. Home call on hold appears, /HOME/FLASH on the handset and /HOME on the telephone base flash.
To resume a home call on hold:
•Press /HOME/FLASH on the handset or /HOME on the telephone base.
To place a cell call on hold:
•Press HOLD on the handset or telephone base. Cell call on hold appears, /CELL on the handset and telephone base flash.
To resume a cell call on hold:
•Press /CELL on the handset or telephone base.
Handset locator
This feature helps you find a misplaced handset.
To start paging: | Directory |
| |||
Call log |
| ||||
1. | Press the MENU softkey when the telephone base is | Page all HS |
| ||
| not in use. |
|
|
| |
|
| Select |
| ||
2. | Press /VOL+ or |
|
|
|
|
|
|
|
| ||
| then press the SELECT softkey on the telephone |
|
|
| |
| base. The telephone base shows Paging all | Paging |
| ||
| handsets and the handset shows ** Paging **. | all handsets |
| ||
To end paging: |
|
|
| ||
| STOP |
|
•Press the STOP softkey or CANCEL/ on the telephone base.
- OR -
•Press /HOME/FLASH, or any dialing keys