Grandstream Networks GXE502X user manual Version

Page 10

GXE502X User Manual 7/9/2008

Default US Busy Tone: f1=480@-24,f2=620@-24,c=500/500)

Line Dialing Settings: This feature adjusts line dialing properties to adhere to the PSTN line requirements.

DTMF Digit Length: The DTMF Digit Length is the play time of DTMF in milliseconds for each digit dialing out from the VOIP side to PSTN

DTMF Digit Volume: The digit output power in dBm.

DTMF Dial Pause: Dial pause is the time between 2 digits when dialing out through the PSTN.

Wait for Dial-Tone:If set to Yes, the device will first obtain a PSTN line and wait for a dial tone from the central office. After obtaining the dial tone, the digits dialed will be sent to the central office.

Minimum Delay Before Dial: This parameter lets users configure a variable delay before dialing the first digit into the PSTN.

Caller ID Standard: This feature configures caller ID handling to match local PSTN settings.

Caller ID scheme: This feature lets you select the model used by local PSTN provider. Please check with local PSTN carrier for configuration information. Current supporting including: Bellcore, ETSI, DTMF or NTT

FSK Caller ID Minimum RX Level: This is an adjustable threshold value for the Caller ID signal strength received to help the device to recognize Caller ID from different networks. (-96 -0dB. Default -40dB)

FSK Caller ID Seizure Bits: This field lets you choose a value of alternating bits (zeros and ones) used for CID channel signaling. The Default is 200.

FSK Caller ID Mark Bits: This feature lets you choose a value for the frequency modulated signal of alternating bits (zeros and ones) used for synchronization. Default 150.

10

Version 03

Image 10
Contents Version Table of Contents Phone Extensions Extension ConfigurationIntroduction Equipment PackagingExtension Digit Prefix Express SetupExtension Length Local Ippbx NumberVersion General Settings Busy Lamp Field and Message Waiting IndicationExtension Number for Internal Phone/FAX ports Trunk ConfigurationAuto Provisioning Extensions after Express Setup Extension Number for PagingInternal Pstn Trunk Line Configuration via FXO ports Enable Current Disconnect Default is YesCurrent Disconnect Threshold Version Line Call Control Internal Phone/Fax PortSIP trunk Version Version Version External Pstn Trunk Line Version Conference Bridge Hunt/Ring Group Configuration Settings sub page of the Phone Extensions menu Group Name Enter a name to identify this hunt/ring groupAuto-Attendant Configuration Voice Menu Configuration Version Playing Rules Configuration System Settings Call Queues Configuration In-Queue Announcements ConfigurationCall Queues Configuration Version Version Networking Setting System ConfigurationWAN Setting Using Dynamic DNS WAN-side Access and SecurityConfiguring port forwarding Route Configuration Setting the Administrator login password System SettingAdministrator Contact information SIP Static Mapped WAN Port for CBCom SIP Static Mapped IP and port ConfigurationVoicemail-to-Email Configuration Start of UDP Port for Media TransferSelf-Defined Time Zone Configuration MTZ+6MDT+5, Time ZoneSystem Music MoH Selection Manual Selection of FaxVoicemail/Fax mail box storage quota Version Feature Codes ƒ Call Forward Status Inquiry Version Firmware Upgrade Backup & Restore Configuration Syslog ConfigurationSystem Level Backup & Restore Advanced Options Configuration Peer SystemsVersion Template Upload Reset & Reboot Status Version Version System Statistics ReportsCall Statistics Version Version Version Version Call Records Downloading Call Records Voicemail Configuration Configuring Voicemail through the IVRVersion Personal Web Portal Version