Grandstream Networks GXE502X user manual Route Configuration

Page 32

GXE502X User Manual 7/9/2008

The GXE502X can be configured to perform port forwarding. In the Port Forwarding settings, enter the port to forward from the WAN-side, the LAN-side device IP address to forward to, the LAN-side device port to forward to, and the protocol (TCP, UDP, or both) to forward in the respective fields.

When done, click on the Submit button to save your changes.

- Route Configuration

This sub menu is used to add static routes into the routing table. This feature is useful when there are destinations that cannot be reached using the default gateway or when there are several subnets in your local network. The interface can accept a network or host address to route. For example:

Network=192.168.22.0/24 can be reached through router 192.168.1.50, then: Destination IP: 192.168.22.0

Mask: 255.255.255.0

Gateway: 192.168.1.50

Static route to host 192.168.22.5 through router 192.168.1.50 then:

Destination IP: 192.168.22.5

Mask: 255.255.255.255

Gateway: 192.168.1.50

32

Version 03

Image 32
Contents Version Table of Contents Extension Configuration IntroductionPhone Extensions Equipment PackagingExpress Setup Extension LengthExtension Digit Prefix Local Ippbx NumberVersion General Settings Busy Lamp Field and Message Waiting IndicationTrunk Configuration Auto Provisioning Extensions after Express SetupExtension Number for Internal Phone/FAX ports Extension Number for PagingInternal Pstn Trunk Line Configuration via FXO ports Enable Current Disconnect Default is YesCurrent Disconnect Threshold Version Line Call Control Internal Phone/Fax PortSIP trunk Version Version Version External Pstn Trunk Line Version Conference Bridge Hunt/Ring Group Configuration Settings sub page of the Phone Extensions menu Group Name Enter a name to identify this hunt/ring groupAuto-Attendant Configuration Voice Menu Configuration Version Playing Rules Configuration System Settings Call Queues Configuration In-Queue Announcements ConfigurationCall Queues Configuration Version Version WAN Setting System ConfigurationNetworking Setting Configuring port forwarding WAN-side Access and SecurityUsing Dynamic DNS Route Configuration Administrator Contact information System SettingSetting the Administrator login password SIP Static Mapped IP and port Configuration Voicemail-to-Email ConfigurationSIP Static Mapped WAN Port for CBCom Start of UDP Port for Media TransferSelf-Defined Time Zone Configuration MTZ+6MDT+5, Time ZoneVoicemail/Fax mail box storage quota Manual Selection of FaxSystem Music MoH Selection Version Feature Codes ƒ Call Forward Status Inquiry Version Firmware Upgrade Backup & Restore Configuration Syslog ConfigurationSystem Level Backup & Restore Advanced Options Configuration Peer SystemsVersion Template Upload Reset & Reboot Status Version Version Call Statistics ReportsSystem Statistics Version Version Version Version Call Records Downloading Call Records Voicemail Configuration Configuring Voicemail through the IVRVersion Personal Web Portal Version