Avaya 4610SW, 4602SW About Local Administrative Procedures, Local Programming Option Code See

Page 37

About Local Administrative Procedures

If

Then (continued)

In certain procedures, for example, SSON or to display the extension number, a value already exists and you press the # button to indicate you either want to enter a new value or have the current value displayed

User input is not allowed for example, during processing

The telephone’s boot image is in the process of being upgraded

An error beep tone sounds

The Message Waiting indicator at the top of the phone and the Message button’s LED on the faceplate are lit but not flashing. Call Appearance Line a alternating with line b after an 1800 millisecond pause, if the value has more than one digit winks 600 milliseconds on, 200 milliseconds off n times for digit n to indicate the current value. The appropriate Call Appearance Line indicator flutters five times to indicate the digit zero. After feedback of the current value, the Message Waiting indicator at the top of the phone and the Message button’s LED flash 500 milliseconds on, 500 milliseconds off to indicate user input is expected/required.

The Message Waiting indicator at the top of the phone and the Message button LED on the faceplate are steadily lit.

All LEDs, meaning Call Appearance Lines a and b, and both Message indicators, light steadily during the download process.

An invalid button was pressed. Try again.

2 of 2

About Local Administrative Procedures

Local administrative procedures allow you to customize the 4600 Series IP Telephone installation for your specific operating environment. This section provides a description of each local administrative option covered in this guide, with references to the pages on which the option appears.

Local Programming Option

Code

See

 

 

 

Static addressing

A D D R (2 3 3 7)

Static Addressing

 

 

Installation on page 39

 

 

 

Quality of Service options

Q O S (7 6 7)

QoS Option Setting on

 

 

page 43

 

 

 

PC Ethernet Interface

I N T (4 6 8)

Interface Control on

 

 

page 45

 

 

 

 

 

1 of 2

 

 

 

Issue 2.2 April 2005 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Series IP Telephone Copyright 2005, Avaya Inc All Rights Reserved Introduction Index Intended Audience About This GuideDocument Organization Installation GuideTerms Used in This Guide Administrative CommandOnline Documentation DeviceAvaya Communication Manager Software Documentation Release Related DocumentsIP Telephone User Guide 4601/4602/4602SW IP Telephone Stand Instructions Customer SupportPage Introduction Series IP Telephone InstallationIP Telephone Models Requirements to Verify about the Network Pre-Installation ChecklistMedia Server Avaya IP IP Telephone Release 16 4600 Series IP Telephone Release 2.2 Installation Guide Optional Items for Some IP Telephones Requirements to Verify for Each IP TelephoneAssembling the 4600 Series IP Telephone Powering the 4600 IP Telephone4621SW 4622SW 4625SW 4630/4630SW 4610SW 4690 Telephone Model See20 4600 Series IP Telephone Release 2.2 Installation Guide Assembling the 4600 Series IP Telephone 22 4600 Series IP Telephone Release 2.2 Installation Guide Assembling the 4600 Series IP Telephone Connection Jacks on a 4630/4630SW IP Telephone Connection Jacks on a 4610SW IP Telephone Connection Jacks on a 4690 IP Conference Telephone Dynamic Addressing Process Dhcp s secs # to program Vlan ID = n Http n uri 46xxUPGRADE.SCR n KB receivedFilename KB received Saving to flash 1%, 1 secsExtension=nnnnnn #=OK NEW= Password= #=OKDowngrading Avaya IP Telephones Page Local Administrative Options Entering Data for Administrative Options Speaker button IP Telephone # Backspace AlternativeConference button Headset buttonThen Entering Data for the 4601 IP TelephoneLocal Programming Option Code See About Local Administrative ProceduresGroup Identifier on Static Addressing Installation Pre-Installation Checklist for Static AddressingNnn.nnn.nnn.nnn Phone= Phone=nnn.nnn.nnn.nnnCallSv=nnn.nnn.nnn.nnn Nnn.nnn.nnn.nnn CallSv=Nnn.nnn.nnn.nnn Router= Router=nnn.nnn.nnn.nnnMask=nnn.nnn.nnn.nnn Nnn.nnn.nnn.nnn Mask=Vlan test=ddd New= Vlan ID=dddd New=Save new values? *=no #=yes New values being savedL2 signaling=d New= QoS Option SettingMute 7 6 7 # Mute Q O S # L2 audio=d New=No new values. #=OK L3 signaling=dd New=Save new values? =no #=yes Mute 4 6 8 # Mute I N T # Interface ControlPHY1=status *=change #=OK PHY2=status *=change #=OK Save new value? =no #=yesNew value being saved IR=enabled 0=disable #=OK IR=disabled 1=enable #=OKMute 4 7 6 8 7 Mute G R O U P Group IdentifierGroup=ddd New= CTI=manual 0=Off #=OK CTI=disabled 1=Manual #=OK Computer-Telephony Integration CTI Enable/DisableMute 2 8 4 # Mute C T I # UDP Port=497xx New=Mute 7 7 6 6 # Mute S S O N # Site-Specific Option Number SettingSSON=ddd New= Mute 7 3 7 3 8 # Mute R E S E T # Reset System ValuesResetting values Reset values? *=no #=yesAre you sure? *=no #=yes Restart phone? =no #=yesRestart the Telephone Mute 7 4 4 Mute S I G Signaling Protocol IdentifierSIG=protocol *=change #=OK Signaling Protocol Identifier Mute 8 3 7 8 # Mute T E S T # Self-Test ProcedureSelf test #=end Self test passed #=endMute 2 5 3 2 7 # Mute C L E a R # Clear ProcedureClear all values? =no #=yes Are you sure? =no #=yesAlerting=setting *=change #=OK Visual/Audible Alerting ProcedureClearing values Mute 2 5 3 7 8 # Mute a L E R T #Mute 2 4 2 3 3 7 # Mute C H a D D R # Manually Setting the Dhcp Client Hardware AddressAll phones save the new value Chaddr=ddd New=Mute 8 2 4 # Mute T a G # Setting L2Q Tagging Control 4601 OnlyPage Error Conditions Troubleshooting GuidelinesDtmf Tones View Administrative Option 00601Dhhhhhh CccccccccCccc Nnn.nnn.nnn.nnnAaa.bbb.ccc.ddd Error and Status MessagesSoftphone Explained in Local Administrative Options Undefined Error Resource Error Troubleshooting the 4601 IP Telephone Line a, which is flashing Cause The PBX does not recognize the set type Page Scenarios for the Restart Process Reset values? =no #=yesRestarting Loading 5 secs Replbootv3.app 4084KBInitializing Dhcp 0 secs * to program Starting Updating boot codeTftp n Http n uri Saving to flash n%, x secs Appfilename n KB receivedLoading 5 secs App 4035 KB StartingSecs ClearingUpdating Where n is the number of KBs downloaded Appfilename n KB received 82 4600 Series IP Telephone Release 2.2 Installation Guide Scenarios for the Restart Process Page Index 86 4600 Series IP Telephone Release 2.2 Installation Guide
Related manuals
Manual 18 pages 16.65 Kb Manual 1 pages 15.59 Kb Manual 90 pages 7.31 Kb Manual 66 pages 59.25 Kb Manual 6 pages 35.08 Kb Manual 60 pages 13.34 Kb

4602, 4602SW, 4620SW, 4601, 4612 specifications

The Avaya 4606 is a versatile and robust IP desk phone designed primarily for business environments that require reliable communication solutions. Part of Avaya's 4600 series, this model integrates advanced technology with user-friendly functionality, accommodating the needs of both everyday users and IT managers.

One of the standout features of the Avaya 4606 is its large graphical display, which provides clear visibility and easy access to essential information. The phone is equipped with a four-line display that allows users to navigate through various menus, check call logs, and access voicemail with ease. Additionally, the display supports multiple languages, catering to a global workforce.

The Avaya 4606 offers a comprehensive range of calling features designed to enhance productivity. These include standard capabilities such as call waiting, call transfer, and speed dialing, as well as more advanced functions like conference calling and directory browsing. The device supports multiple lines, making it simple for users to manage several calls simultaneously.

From a technology standpoint, the Avaya 4606 is built on the Session Initiation Protocol (SIP), enabling seamless integration with various communication platforms. This technology ensures high-quality voice communication while allowing for easy customization and scalability in response to changing business needs. The phone is also compatible with Avaya’s One-X portal, providing users with additional features like unified messaging and mobile integration.

The Avaya 4606 is designed with user comfort in mind. It features ergonomic handset design and adjustable tilting options, allowing users to position the phone for optimal viewing and comfort during long calls. The dedicated buttons for frequently used functions further streamline operations and reduce the learning curve for new users.

Security is a critical aspect of any business communication tool, and the Avaya 4606 addresses this with built-in encryption capabilities that safeguard sensitive communications. This is particularly important in industries where confidentiality is paramount.

With its combination of user-friendly features, advanced technology, and security, the Avaya 4606 is well-suited for enterprises looking to enhance their communication infrastructure. Whether for individual users or office teams, this desk phone delivers reliable performance that can adapt and evolve with business needs. Its straightforward setup and management also appeal to IT departments, making it a comprehensive solution for modern workplaces.
Top Page Image Contents