AT&T ATTCL83201 Press MENU/SELECT, Calling Handset X or Calling all handsets, Intercom ended

Page 48

Multiple handset use

Intercom

Using the telephone base:

 

1. Press MENU/SELECT in idle mode to enter the main

 

 

menu. Press qCID or pDIR to scroll to >Intercom, then

Calling

press MENU/SELECT.

HANDSET X

• If you have one handset, the telephone base shows

 

Calling HANDSET X.

 

 

• If you have more than one handset, the telephone

 

BASE

base shows INTERCOM TO: Use the dialing keys to

 

is calling

enter a specific handset number (1-9for handsets

 

 

1-9, TONE

 

followed by 0-2for handsets 10-12, or

 

 

 

 

 

TONE

 

followed by # for all handsets), or press

 

Intercom

 

qCID or pDIR to scroll to the desired handset and

 

 

press MENU/SELECT. The telephone base shows

 

 

Calling HANDSET X or Calling all handsets.

 

 

 

 

The destination handset(s) rings and shows Base is calling, BASE 0 is

calling or BASE 0 is calling all.

 

 

2. To answer the intercom call, press PHONE/FLASH,

/SPEAKER�� � or any

dialing key (0-9, TONE, or #) on the destination handset. Both the base and the handset now show Intercom.

3. To end the intercom call, one party presses OFF/CANCEL, or place the handset back in the telephone base or charger; or presses CANCEL on the telephone base. The other party hears four beeps. Both devices display

Intercom ended.

NOTES:

• Before the intercom call is answered, you can cancel it by pressing OFF/CANCEL on the handset or CANCEL on the telephone base.

•If the called device is not answered within 100 seconds, or accessing the directory or caller ID log, or is on a call, or is out of range, the initiating device shows No answer. Try again.

• To temporarily silence the intercom ringer, press OFF/CANCEL or MUTE/DELETE on the handset, or press CANCEL or MUTE on the telephone base.

• You can only use one pair of devices at a time to make intercom calls.

Answer an incoming call during an intercom call

If you receive an outside call during an intercom call, there is a two-beep call waiting tone.

• To answer the call, press PHONE/FLASH or /��SPEAKER� on the handset, or /��SPEAKER� on the telephone base. The intercom call ends automatically. The party on the intercom call hears four beeps. Other system devices can also answer the incoming call by pressing PHONE/FLASH or /SPEAKER�� � on the handset or /SPEAKER�� � on the telephone base.

•To end the intercom call without answering the incoming call, press OFF/CANCEL on the handset or CANCEL on the telephone base.

42

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Complete user’s manual Congratulations Parts checklist Abridged user’s manualTable of contents Multiple handset use Index QCID/VOLUME Quick reference guide handsetMain menu Cancel MENU/SELECT Quick reference guide telephone baseAnswer on Installation Avoid placing the telephone base too close toTelephone base and charger installation Telephone base installationCharger installation Battery installation and charging StepCharge light Step Installation options Tabletop to wall mount installationWall mount to tabletop installation Handset settings SettingRinger volume Ringer toneSet date/time To set the date and time manuallyTo turn on or off the caller ID announce feature LCD languagePress MENU/SELECT to choose LCD language Set English/Français/Español as LCD language?Voicemail visual message waiting indicator Save your speed dial voicemail numberTo save your voicemail number To manually turn off the new voicemail indicators Clear voicemail indicationRename handset Key toneUse caller ID to automatically set date and time Home area codeTo set the home area code Only for 7 digit dial from CIDDial mode To set the dial modeWebsite Telephone base settings Ringer Volume MENU/SELECT, or enter the number using the dialing Or Español Base Use this feature when the telephone indicates there is Rename base Press MENU/SELECT. The screen briefly shows Use qCID or pDIR to highlight Tone or Pulse, then Telephone operation Ending a call Using a cordless handset Using the telephone base Press /SPEAKER Auto offTemporary ringer silencing Using a cordless handset Handset speakerphone Last number redialTo view the ten most recently dialed numbers To redial a number Using a cordless handset To delete a redial entry Using a cordless handsetEqualizer Volume control Using a cordless handset Options while on callsCall waiting Using a cordless handset To mute a call Using the telephone base To mute a callMute To end mute a callTo access the caller ID log while on a call To access the redial list while on a callChain dialing Temporary tone dialing Blind transfer To transfer an outside call from a handsetPress MENU/SELECT to choose Transfer To transfer an outside call from the telephone base Transfer from Base 0 Base representsMultiple handset use Handset locatorTo start the paging tone To stop the paging toneIntercom Press MENU/SELECT Calling HandsetCalling Handset X or Calling all handsets Calling or Base 0 is calling allCall transfer using intercom Transfer . The handset shows Call transferred .Turn PTT on or off Using a cordless handset Push-to-talk PTTPTT call to a single device Using a cordless handset Handset shows Connecting to HandsetTelephone base shows Connecting to Handset To call multiple devices Using a cordless handset Connecting to groupPTT call to multiple devices Answer a PTT call Change a one-to-one PTT call to an intercom call Answer an incoming call during a PTT callMake an outgoing call during PTT call End or leave a PTT callAbout the directory Shared directoryCapacity Create directory entries Create a new directory entryAdd a predialed telephone number to the directory Review the directory Review directory entriesSearch the directory Search by nameDelete a directory entry Using a cordless handset Dial, delete or edit directory entriesDisplay dial Edit a directory entry Speed dial Assign a speed dial numberAssign your voicemail speed dial number Reassign a speed dial number Delete a speed dial numberDial. Press Make a call using speed dial Check your voicemail using speed dialAbout caller ID Information about caller ID with call waitingMissed new call indicator Caller ID historyHow the caller ID history caller ID log works Caller ID operation Memory matchReview the caller ID history Beginning or end of the caller ID logView dialing options Dial a caller ID log entryDelete caller ID log entries To delete an entry To delete all entriesSave a caller ID log entry to the directory Reasons for missing caller ID information On-screen message ReasonAnswering system settings AnnouncementPress MENU/SELECT to select Play annc MENU/SELECT to enter the main menu Answering system settings Answer on/off ANS onTo change the setting Using a cordless handset Call screeningPress MENU/SELECT to select Call screening To set the number of rings Using a cordless handset Number of ringsToll saver Remote access code To change the remote access codeMessage alert tone Message recording time Answering system and voicemail indicators Using the answering machine and voicemail togetherAbout the answering system Message capacity Voice promptsCall screening To screen a call at the telephone base To screen a call at the handset Call interceptBase ringer Temporarily turning off the message alert toneMessage playback To listen to messages at the telephone basePlay old msgs, then press MENU/SELECT or /PLAY/STOP To listen to messages on a cordless handset When messages are playing on the telephone base When messages are playing on the handsetOptions during playback Delete all old messages To delete all old messages on the telephone baseDelete all old messages? To delete all old messages on the handsetRecord a memo Using a cordless handset Recording and playing memosPlay back a memo Base message counter displays Message counter displaysRemote access Remote commandsTo remotely reach your answering system Remote access Adding and registering handsets/headsets Register a handset to the telephone baseRegistering... Please wait and the in USE light on Deregistering handsets Press and hold /HANDSET Locator onIt shows Deregister all devices? Release /HANDSET LocatorAlert tones and lights Handset screen iconsTelephone base screen icons Handset alert tones Telephone base alert tonesLights USEScreen display messages Screen messagesDisplay screen messages Transfer toTroubleshooting My telephone doesn’t work at allCannot get a dial tone Cannot dial outMy cordless handset isn’t performing normally Batteries do not hold a chargeHear other calls while using my phone My cordless handset does not ring when I receive a callMy calls cut in and out while I’m using my cordless handset System does not receive caller ID when on a call Charge light is off or blinkingMy caller ID isn’t working Incomplete messagesSystem does not respond to remote commands Difficulty hearing messagesSystem does not answer after the correct number of rings System does not record messages Outgoing announcement is not clearNew voicemail and show on the screens, and I don’t know why Cannot retrieve voicemail messagesCommon cure for electronic equipment Maintenance Cleaning your telephoneTaking care of your telephone Avoid waterImportant safety information Safety informationEspecially about cordless telephones FCC Part 68 and Acta Industry CanadaFCC Part Limited warranty Call 1 800 222-3111. In Canada, dial 1 866How do you get warranty service? Technical specifications Operation Operating timeIndex 112 Remote access wallet card Action Remote command
Top Page Image Contents