
Multiple handset use
Push-to-talk (PTT)
Make an outgoing call during PTT call
• During a /SPEAKER on your telephone base to get a dial tone. The PTT call
ends automatically.
•During a PTT call, press PHONE/FLASH on the initiating handset or /SPEAKER on the initiating telephone base. The PTT call ends automatically and you get a dial tone.
•During a PTT call, press PHONE/FLASH on any one of the destination handsets or press /SPEAKER on the destination telephone base. That device gets a dial tone. The PTT call continues for the rest of the PTT participants.
End or leave a PTT call
For
Press OFF/CANCEL on the handset or place the handset in the telephone base or charger, or press CANCEL on the telephone base. The screen shows Push to talk Ended.
NOTE: After PUSH TO TALK on the handset or PTT on the telephone base is released, the PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or PTT on the telephone base within ten seconds, the PTT call ends automatically.
50