Multiple handset use
Push-to-talk (PTT)
Using the telephone base:
1.There are a few ways to begin a PTT call to a single handset. When the telephone base is not in use:
•If you have one handset, press and hold PTT.
•If you have more than one handset:
w Press PTT. Then use the dialing keys to enter the destination handset number.
PUSH TO TALK
>Handset X
p q
Connecting to
Handset X...
p q
w Press qCID or pDIR to highlight the destination | Press and hold |
handset number. Then press MENU/SELECT or PTT. | [PTT] to talk |
|
The telephone base shows Connecting to HANDSET X...
(HANDSET represents the handset name, X represents
the destination handset number) for a few seconds. When the connection is made, both the telephone base and destination handset display Press and hold [PTT] to talk.
2.Press and hold PTT. A chirp indicates your microphone is on. Speak towards the telephone base. Your voice is broadcast to the destination handset.
While you are speaking, the telephone base shows PTT To handset: X.
PTT To
handset: X
3.Release PTT after speaking. Both devices beep once again and the screens show Press and hold [PTT] to talk. Then you can press and hold PTT to continue speaking or the destination device can respond (see Answer a PTT call on page 48).
4.To end the PTT call, press CANCEL. The telephone base shows Push to talk Ended for a few seconds.
46