●If you want to program other buttons, repeat the two previous steps.
●Slide the T/P switch to the center position.
NOTE: If you make a mistake entering a programming code, simply touch the button again and reenter the code.
The following feature descriptions include feature programming codes and brief programming instructions. For example:
To program: ● T/P to P ● Touch the button ● Dial *84
●T/P to center
means slide the T/P switch to P, touch the button you want to program, dial the programming code (in this case, *84), and slide the T/P switch to the center position.
NOTIFY
Use the Notify feature to set up a direct messaging system with another voice terminal. With this feature, you program a Send button to turn on a Notify light next to the corresponding Receive button on the voice terminal of someone for whom you often have messages. For example, a secretary can notify his or her boss that a message is waiting. You can program multiple Send and Receive buttons. For each Send button you program on your voice terminal, there must be a Receive button that has been programmed at the receiving voice terminal, and vice versa. Be sure to label the buttons so you can identify the per- son notifying you or receiving your notification.
17