AT&T 1030, 3070 manual Special Characters in Programmed Dialing Sequences, Touch Transfer

Special Characters in Programmed Dialing Sequences

You may occasionally need to program a pause, stop, or switch- hook flash into an Outside Auto Dial or Speed Dial sequence, or you may need to switch from rotary to Touch-Tone signals in the middle of a programmed dialing sequence. To do so, you need to enter the following special characters when you pro- gram the sequence.

Pause. To program a pause (1.5 seconds) into a dialing se- quence (for example, between a pool access code and an out- side telephone number):

●Touch Hold (Pause).

Stop. To program a stop into a dialing sequence (for example, to program a stop between an alternate long distance telephone number and your access code):

●Touch Drop (Stop).

To resume the dialing sequence after the stop, touch the Auto Dial button or dial the Speed Dial code again.

Touch-Tone Enable. To program Touch-Tone Enable into a dial- ing sequence (for example, to use a credit card authorization service):

●Touch Transfer.

Switchhook Flash. To program a switchhook flash into a dial- ing sequence (for example, if you program a button with a PBX, Centrex, or Custom Calling feature code):

Hold

Pause

Drop

Stop

Transfer

20