AT&T 3070, 1030 manual Last Number Redial, Manual Signaling

LAST NUMBER REDIAL

Use the Last Number Redial feature to redial the number you dialed most recently. (The number cannot contain a pause, a stop, a Touch-Tone enable, or a switchhook flash.) If you have a 34-button voice-terminal, you can follow the programming in- structions below to program this feature onto a button. If you have a 5- or 10-button voice terminal, you can dial a code to use this feature and save a button for another use.

To program: ● T/P to P ● Touch the button ● Dial *73

●T/P to center

If you program a Last Number button, you can redial the number you most recently called with the touch of a button:

●Lift your handset.

●Touch Last Number.

Using a Dial Code (5- and 10-button voice terminals only)

To redial a number using the Last Number Redial code:

●Lift your handset.

●Dial #24.

MANUAL SIGNALING

Use the Manual Signaling feature to generate a beep at a coworker’s voice terminal. Assign a Manual Signaling button to each person you want to signal.

To program: ● T/P to P ● Touch the button ● Dial * 6 + an intercom number ● T/P to center

+

+

Last Number

#24

25